Optimization of Extraction Process and Characterization of Adansonia Digitata (Baobab) Seed Oil
Abstract
This study employed a two-level full factorial design of experiments to optimize the solvent extraction of baobab seed oil. Eight experimental runs were conducted using three independent variables: solvent volume, extraction time, and sample weight. A first-order regression model adequately described the experimental data, with an R2 value of 0.9999, an F-value of 2758.64, and a P-value of 0.0146, indicating a statistically significant model. The predicted values agreed closely with the experimental results. The optimum oil yield of 22.52% was obtained by extracting 30.00 g of pulverized baobab seed with 200.00 cm3 of n-hexane for 90 minutes. The extracted oil exhibited a high degree of unsaturation, with an iodine value of 98.35 ± 0.99 gI2/100g and a saponification value of 210.27 ± 0.12 mgKOH/g. The acid value, peroxide value, and free fatty acid content were 13.48 ± 0.04 mgKOH/g, 25.50 ± 0.13 meqKOH/g, and 6.78 ± 0.05%, respectively. These physicochemical properties were generally consistent with values reported in previous studies. The findings demonstrate the effectiveness of the two-level full factorial design in optimizing baobab seed oil extraction and provide insights into the physicochemical properties of the extracted oil. Key Words: Optimization, Baobab, Extraction, Oil, Solvent.
Keywords
References
More Articles from INTERNATIONAL JOURNAL OF CHEMISTRY AND CHEMICAL PROCESSES
Author: Mabel E. Oderoha, Osaro Iyekowa, Osahon Kennedy Ogbeide, Osaze Edosuyi, Kester C. Chukwuemeke, Amuche A. Goddy, Osayemwenre Erharuyi
Author: Ananaba J. C., a, Ideriah T. J. K., b, Nitonye V. I. P., a, and Akinfolarin M. O., a
Author: Anorue, S. C., Cookey, G. A., and Orlu, H. A
Author: Amangele Iyenemi Crystal PhD
Author: Anekwe, Christopher Ejike, Okonkwo Chidiebere Christiana
