Evaluation of the ph Values and Thermophysical Properties of Moringa Oleifera Oil-Based Cutting Fluid in Comparison with Conventional Oil-Based Cutting Fluid

Adler, D. P., Hii, W. W.-S., Michalek, D. J., & Sutherland, J. W. (2002). Examining the role of cutting fluids in machining and efforts to address associated environmental/health concerns. Retrieved from https://www.researchgate.net/publication/230770995_Examining_the_role_of_cutting fluids_in_machining_and_efforts_to_address_associated_environmentalhealth_concer ns Accessed March 2, 2026. Afonso, I. S., Nobrega, G., Lima, R., Gomes, J. R., & Ribeiro, J. E. (2023). Conventional and Recent Advances of Vegetable Oils as Metalworking Fluids : A Review. Lubricants, 11(4), 160. https://doi.org/10.3390/lubricants11040160 Ahmed, D. I., Kasolang, S., Bakar, M. A. A., & Yousif, M. H. (2014). Alternative Lubricant based on Renewable Resources for Industrial Applications. Advanced Materials Research. Vol. 894 (2014) pp 275 – 279. https://doi.org/10.4028/www.scientific.net/AMR.894.275 Alves, S. M., & Oliveira, G. De. (2006). Development of new cutting fluid for grinding process adjusting mechanical performance and environmental impact. Journal of Materials processing Technology. 179, 185–189. https://doi.org/10.1016/j.jmatprotec.2006.03.090 Bennett, E. O. (1983). Water based cutting fluids and human health. Tribology International, 16(3), 133–136. https://doi.org/10.1016/0301-679X(83)90055-5 Biresaw, G., Adhvaryu, A., & Erhan, S. Z. (2003). Friction properties of vegetable oils. Journal of the American Oil Chemists’ Society, 80(7), 697. https://doi.org/10.1007/S11746-003- 0760-7 Bork, C. A. S., Gonçalves, J. F. de S., Gomes, J. de O., & Gheller, J. (2014). Performance of the jatropha vegetable-base soluble cutting oil as a renewable source in the aluminum alloy 7050-T7451 milling. CIRP Journal of Manufacturing Science and Technology, 7(3), 210–221. https://doi.org/10.1016/J.CIRPJ.2014.04.004 Chanes de Souza, M., Fracaro de Souza Gonçalves, J., Cézar Gonçalves, P., Yuji Sudo Lutif, S., & de Oliveira Gomes, J. (2019). Use of Jatropha and Moringa oils for lubricants: Metalworking fluids more environmental-friendly. Industrial Crops and Products, 129, 594–603. https://doi.org/10.1016/J.INDCROP.2018.12.033 Elewab, I., Galal, A., Saker, N., & Abd El Tawabd, A. (2020). Comparative Study on the Effect of Vegetable Based Cutting Fluid and Mineral Oil on Cutting Forces and Surface Roughness during Turning Operation. (Dept. M ( Production ) ). Bulletin of the Faculty of Engineering. Mansoura University, 40(4), 121 – 131. https://doi.org/10.21608/bfemu.2020.102407 Debnath, S., Reddy, M. M., & Yi, Q. S. (2014). Environmental friendly cutting fluids and cooling techniques in machining: A review. Journal of Cleaner Production, 83, 33–47. https://doi.org/10.1016/j.jclepro.2014.07.071 Deshpande, V., & Jyothi, P. N. (2022). A Review on Sustainable Eco-friendly Cutting Fluids. Journal of Sustainability and Environmental Management, 1(2), 306–320. https://doi.org/10.3126/josem.v1i2.45383 IJEMT Gajrani, & Sankar, R. (2017). Past and Current Status of Eco-Friendly Vegetable Oil Based Metal Cutting Fluids. Materials Today: Proceedings, 4(2), 3786–3795. https://doi.org/10.1016/J.MATPR.2017.02.275 Hassan, T., Kandeel, E. M., Taher, M. S., Badr, E. E., & El-Tabei, A. S. (2023). Sustainable utilization of the vegetable oil manufacturing waste product in the formulation of eco- friendly emulsifiable cutting fluids. Scientific Reports, 13(1), 1–23. https://doi.org/10.1038/s41598-023-46768-8 John, S., Majiyebo, E. M., Adeogu, M., Engineering, B., State, K., Lokoja, P., & State, K. (2022). The Need for a Sustainable and Environmetal Friendly Bio Cutting Oil Additives. Retrieved from https://www.academia.edu/93392479/The_Need_for_a_Sustainable_and_Environmet al_Friendly_Bio_Cutting_Oil_Additves?uc-sb-sw=5977647 Accessed August, 6 2026. Kazeem, R. A., Fadare, D. A., Adebayo, A. S., Ikumapayi, O. M., Awonusi, A. A., Dare, A. A., & Okokpujie, I. P. (2023). Cutting Fluids Usage and Impacts in Metal Workshops in Ibadan, Southwestern Nigeria. International Journal of Sustainable Development and Planning, 18(1), 1–16. https://doi.org/10.18280/IJSDP.180101 Kazeem, R. A., Fadare, D. A., Ikumapayi, O. M., Adediran, A. A., Aliyu, S. J., Akinlabi, S. A., Jen, T. C., & Akinlabi, E. T. (2022). Advances in the Application of Vegetable-Oil- Based Cutting Fluids to Sustainable Machining Operations—A Review. Lubricants, 10(4). https://doi.org/10.3390/lubricants10040069 Lee, C. T., Lee, M. B., Mong, G. R., & Chong, W. W. F. (2022). A bibliometric analysis on the tribological and physicochemical properties of vegetable oil–based bio-lubricants (2010–2021). Environmental Science and Pollution Research, 29(37), 56215–56248. https://doi.org/10.1007/s11356-022-19746-2 LibreTexts, (2024). Density. Retrieved from https://chem.libretexts.org/Courses/Heartland_Community_College/CHEM_120%3A Fundamentals_of_Chemistry/01%3A_Measurement_and_Problem_Solving/1.14%3A DensityAccessed August 13, 2026. Lloyd, G., & Schofield, G. I. L. (1975). Enteric bacteria in cutting oil emulsion. Tribology International. Vol. 8, Issue February, pp. 27-29. https://doi.org/https://doi.org/10.1016/0301-679X(75)90041-9 Musavi SH, Davoodi B, Niknam SA. (2021). Eco-green machining of superalloy A286: Assessment of tool wear morphology and surface topology. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 235(9):1412-1424. doi:10.1177/0954405421995618 Nácher-Mestre, J., Cano, D. L., Habib, K. A., Branchadell, C. M., & Pérez-Sánchez, J. (2025). Curbing Petrochemical Lubricants by Plant-Based Chemicals: A Reliable Opportunity to Align with Sustainable Development Goals. Lubricant, 13(2, 1-20. https://doi.org/10.3390/lubricants13020071 Ozcelik, B., Kuram, E., Huseyin Cetin, M., & Demirbas, E. (2011). Experimental investigations of vegetable based cutting fluids with extreme pressure during turning of AISI 304L. Tribology International, 44(12), 1864-1871. https://doi.org/10.1016/j.triboint.2011.07.012 IJEMT Rashed, A. H., (2023). The Role of Industrial Sector in Pollution Control in the Context of Sustainable Development Goals. Advances and Challenges in Hazardous Waste Management. Industrial Pollution - Recent Advances, New Perspectives and Applications. IntechOpen. 18pp. Retrieved from https://www.researchgate.net/publication/374848671_The_Role_of_Industrial_Sector _in_Pollution_Control_in_the_Context_of_Sustainable_Development_GoalsAccessed June, 16 2026. https://doi.org/10.5772/intechopen.112671 Shashidhara, Y. M., & Jayaram, S. R. (2010). Vegetable oils as a potential cutting fluid-An evolution. Tribology International, 43(5–6), 1073–1081. Retrieved from https://www.sciencedirect.com/science/article/abs/pii/S0301679X09004022 Accessed April 18, 2026 https://doi.org/10.1016/j.triboint.2009.12.065 United Nations. (2018). Sustainable Development Goals: 17 Goals to Transform our World| United Nations. Retrieved from https://www.un.org/en/exhibits/page/sdgs-17-goals-transform-world Accessed March 2, 2026. Xavior, M. A., & Adithan, M. (2009). Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic stainless steel. Journal of Materials Processing Technology, 209(2), 900–909. https://doi.org/10.1016/j.jmatprotec.2008.02.068 Wang, J (2025). Creaming Index. Bio-protocol Preprint. 10.21769/p2812. In: Wang, J. J., Liu, H., Zhao, Y., Wang, R., Li, Y. and Wu, Y. (2021). Characterization of a Novel Food Grade Emulsion Stabilized by the By- Product Proteins Extracted from the Head of Giant Freshwater Prawn (Macrobrachium rosenbergii). Frontiers in Nutrition 0(0). Retrieved from https://bio-protocol.org/exchange/preprintdetail?id=2812&type=3 Accessed April 13, 2026. DOI: 10.3389/fnut.2021.676500