Assessment of The Perceived Effect of Noise on Workers’ Health in Selected Construction Sites in Delta State

Abas, N. H. (2020). The analysis of struck-by accidents at construction sites in Johor. International Journal of Integrated Engineering, 12, 262–275. Abdul Hamid, A. R., Yusof, W. Z. W., & Singh, B. (2003, August 26–28). Hazards at construction sites [Conference presentation]. 5th Asia-Pacific Structural Engineering and Construction Conference, Johor Bahru, Malaysia. Adamu, S. S., Piyush, T., and Mohammed, S. S. (2017). Study on the effect of noise pollution in the oil and gas industry. International Journal of Applied Biology and Research, 7(4), 813– 816. Adepu, N., Kermanshachi, S., & Pamidimukkala, A. (2022). Determining causes of coal mine hazards: Prevention and construction measures. Tran-SET 2022, 289–298. Al Amin, M. S., Nuradilah, Z., Isa, H., Nor Akramin, M., Febrian, I., & Taufik, T. (2013). A review on ergonomics risk factors and health effects associated with manual materials handling. Advanced Engineering Forum, 10, 251–256. https://doi.org/10.4028/www.scientific.net/AEF.10.251 Alali, K., & Casali, J. G. (2012). Auditory backup alarms: Distance-at-first-detection via in-situ experimentation on alarm design and hearing protection effects. Work, 41(Suppl. 1), 3599– 3607. Ali, S. A. (2011). A case study of construction noise exposure for preserving worker's hearing in Egypt. Acoustical Science and Technology, 32(5), 211–215. Aliabadi, M., Golmohammadi, R., Mansoorizadeh, M., Khotanlou, H., & Ohadi, A. (2013). Development of an empirical model for noise prediction in typical industrial workrooms based on artificial neural networks. Noise & Vibration Worldwide, 44(10), 9–21. Alli, B. O. (2008). Fundamental principles of occupational health and safety, second edition. Almaskati, D., Kermanshachi, S., Pamidimukkala, A., Loganathan, K., & Yin, Z. (2024). A Review on Construction Safety: Hazards, Mitigation Strategies, and Impacted Sectors. Buildings, 14(2), 526. https://doi.org/10.3390/buildings14020526 Almaskati, D., Kermanshachi, S., Pamidimukkala, A., Loganathan, K., & Yin, Z. (2024). A review on construction safety: Hazards, mitigation strategies, and impacted sectors. Buildings, 14(2), 526. https://doi.org/10.3390/buildings14020526 Anantharaman, V., Zuhary, T., Ying, H., & Krishnamurthy, N. (2023). Characteristics of injuries resulting from falls from height in the construction industry. Singapore Medical Journal, 64, 237. https://doi.org/10.4103/singaporemedj.SMJ-2020-193 Antwi-Afari, M. F., Li, H., Seo, J., & Wong, A. Y. L. (2018). Automated detection and classification of construction workers' loss of balance events using wearable insole pressure sensors. Automation in Construction, 96, 189–199. https://doi.org/10.1016/j.autcon.2018.09.010 Anyanwu, J., Ezenwaji, I., Okenjo, G. and Enyi, C. (2015). Occupational Stress and Management Strategies of Secondary School principals in Cross River State, Nigeria. Journal of Education and Practice, 6(27), 37-43 Australian Bureau of Statistics. (2018). Labour force, detailed — work-related injuries. https://www.abs.gov.au/statistics/labour/earnings-and-working-conditions/work-related- injuries/latest-release Azarmi, F., & Kumar, P. (2016). Ambient exposure to coarse and fine particle emissions from building demolition. Atmospheric Environment, 137, 62–79. https://doi.org/10.1016/j.atmosenv.2016.04.040 IJEMT Ballesteros, M. J., Fernández, M. D., Quintana, S., Ballesteros, J. A., & González, I. (2010). Noise emission evolution on construction sites: Measurement for controlling and assessing its impact on the people and on the environment. Building and Environment, 45(3), 711–717. Barbosa, A. A. R., & Bertoli, S. R. (2017). Noise generated by portable saw in different construction materials. American Journal of Civil Engineering and Architecture, 5(1), 17– 24. Barikayeva, N., Nikolenko, D. and Ivanova, J. (2016). About Forecasting Air Pollution in the Construction of Highways. IOP Conf. Series: Materials Science and Engineering, 463, 1- 5 Barikayeva, N., Nikolenko, D. and Ivanova, J. (2018). About forecasting air pollution in the construction of highways. IOP Conf. Series: Materials Science and Engineering, 463(1), 1-5 Barkokébas Jr., B., Vasconcelos, B. M., Lago, E. M. G., & Alcoforador, A. F. P. (2012). Analysis of noise on construction sites of high-rise buildings. Work, 41(Suppl. 1), 2982–2990. Barron, R. F. (2002). Industrial noise control and acoustics. CRC Press. Beavers, J. E., Moore, J. R., Rinehart, R., & Schriver, W. R. (2006). Crane-related fatalities in the construction industry. Journal of Construction Engineering and Management, 132, 901– 910. https://doi.org/10.1061/0733-9364(2006)132:9(901) Bedi, J. K., Rahman, R. A., & Din, Z. (2021). Heavy machinery operators: Necessary competencies to reduce construction accidents. IOP Conference Series: Earth and Environmental Science, 641, 012007. https://doi.org/10.1088/1755-1315/641/1/012007 Berglund, B., Lindvall, T., & Schwela, D. H. (1999). Guidelines for community noise. World Health Organization. Betit, E., Strand, J., Dale, A. M., Chang, C., Schneider, S., Tiedeman, J., Hopwood, D., Cain, C. T., & Rempel, D. (2017). Engaging construction contractors to identify barriers and promising practices to reduce the risk for occupational injuries associated with manual materials handling. Proceedings of the Human Factors and Ergonomics Society Annual Meeting, 61, 960–962. https://doi.org/10.1177/1541931213601719 Bhagwat, P. H., and Meshram, P. M. (2013). Study of noise pollution during Ganesh Utsav in Yavatmal City. Journal of Pharmacy and Pharmaceutical Sciences, 2(1), 496. Biibalo, L. L., Nwii, A. A, and Nwane, T. I. (2024). Assessment of Noise Pollution Level of Selected Construction Sites with in the Residential Area in Obio/Akpo Local Government Area, Rivers States, Nigeria. Asian Journal of Advanced Research and Reports 18(12), 526-534 Biibaloo, L. L., Nwii, A. A. and Nwanne, T. I. (2024). Assessment of Noise Pollution Level of Selected Construction Sites with in the Residential Area inObio Akpo Local Government Area, Rivers States, Nigeria. Asian Journal of Advanced Research and Reports, 18(12), 526-534 Binazzi, A., Di Marzio, D., Verardo, M., Migliore, E., Benfatto, L., Malacarne, D., Mensi, C., Consonni, D., Eccher, S., & Mazzoleni, G. (2021). Asbestos exposure and malignant mesothelioma in construction workers — Epidemiological remarks by the Italian National Mesothelioma Registry . International Journal of Environmental Research and Public Health, 19, 235. https://doi.org/10.3390/ijerph19010235 Birma, G. J., Ukpebor, E. E. and Issa, B. R. (2018). Assessment of Environmental Noise Pollution in Warri and Effurun Metropolitan Cities. Current World Environment, 13(3), 434-445 IJEMT Blair, B. D., Brindley, S., Dinkeloo, E., McKenzie, L. M., & Adgate, J. L. (2018). Residential noise from nearby oil and gas well construction and drilling. Journal of Exposure Science & Environmental Epidemiology, 28(6), 538. Boadu, E., Wang, C., & Sunindijo, R. (2020). Characteristics of the construction industry in developing countries and its implications for health and safety: An exploratory study in Ghana. International Journal of Environmental Research and Public Health, 17(11), 4110. https://doi.org/10.3390/ijerph17114110 Breeding, D. C. (2011). What is hazardous? https://ohsonline.com/Articles/2011/07/01/What-Is- Hazardous.aspx Bruel, M. and Kjaer, T. S. (2000). Environmental Noise Handbook. http://www.macavsat.org/pdf_files/misc_reports/bk.pdf. Buksh, N., Nargis, Y., Yun, C., He, D. and Ghufran, N. (2018). Occupational Noise Exposure and Its Impact On Worker’s Health and Activities. International Journal of Public Health and Clinical Sciences, 5(2), 180-195 CALM II Network. (2007). Research for a quieter Europe in 2020: An updated strategy paper of the CALM II Network. European Commission. Cao, Z., Chen, T., & Cao, Y. (2021). Multiple factor comprehensive analysis model of occupational health and safety training effect for construction workers. Journal of Engineering Research. https://doi.org/10.36909/jer.11685 Carter, G., & Smith, S. D. (2006). Safety hazard identification on construction projects. Journal of Construction Engineering and Management, 132, 197–205. https://doi.org/10.1061/0733-9364(2006)132:2(197) Carty, P., Cooper, M. R., Barr, A., Neitzel, R. L., Balmes, J., & Rempel, D. (2017). The effects of bit wear on respirable silica dust, noise and productivity: A hammer drill bench study. Annals of Work Exposures and Health, 61(6), 700–710. Cavallari, J. M., Burch, K. A., Hanrahan, J., Garza, J. L., & Dugan, A. G. (2019). Safety climate, hearing climate and hearing protection device use among transportation road maintainers. American Journal of Industrial Medicine, 62, 590–599. https://doi.org/10.1002/ajim.22986 Chang, W. R., Leclercq, S., Lockhart, T. E., & Haslam, R. (2016). State of science: Occupational slips, trips and falls on the same level. Ergonomics, 59, 861–883. https://doi.org/10.1080/00140139.2016.1165493 Cheriyan, D., & Choi, J. (2020). A review of research on particulate matter pollution in the construction industry. Journal of Cleaner Production, 254, 120077. https://doi.org/10.1016/j.jclepro.2020.120077 Chi, C. F., Lin, S. Z. (2018). Classification scheme and prevention measures for caught-in-between occupational fatalities. Applied Ergonomics, 68, 338–348. https://doi.org/10.1016/j.apergo.2017.12.006 Chi, C. F., Lin, Y. Y., & Ikhwan, M. (2012). Flow diagram analysis of electrical fatalities in construction industry. Safety Science, 50, 1205–1214. https://doi.org/10.1016/j.ssci.2012.01.006 Chi, F., Zhou, J., Zhang, Q., Wang, Y., & Huang, P. (2017). Avoiding the health hazard of people from construction vehicles: A strategy for controlling the vibration of a wheel loader. International Journal of Environmental Research and Public Health, 14, 275. https://doi.org/10.3390/ijerph14030275 Choi, J., Kang, H., Hong, T., Baek, H., & Lee, D. E. (2021). Automated noise exposure assessment model for the health of construction workers. Automation in Construction, 126, 103657. IJEMT Christian, M., Bradley, J., Wallace, J., & Burke, M. (2009). Workplace safety: A meta-analysis of the roles of person and situation factors. Journal of Applied Psychology, 94(5), 1103–1127. https://doi.org/10.1037/a0016172 Chronowski, P., Modares, M., & Mohammadi, J. (2017). Data-driven investigation into causes of collapse in scaffolds. Practice Periodical on Structural Design and Construction, 22, 04016023. https://doi.org/10.1061/SC.1943-5576.0000296 City of Cape Town , (2019). What is Noise? City of capetown isixeko sasekapa stad kaapstad. www.capetown.gov.za Clark, C., Crumpler, C. and Notley, H. (2020). Evidence for Environmental Noise effects on health for the United Kingdom policy context: a systematic review of the effects of environmental noise on mental health, wellbeing, quality of life, cancer, dementia, birth, reproductive outcomes and cognition. Int J. Environ Res Public Health, 17(2), 393-400 Clarke, S. (2006). The relationship between safety climate and safety performance: A meta- analytic review. Journal of Occupational Health Psychology, 11(4), 315–327. https://doi.org/10.1037/1076-8998.11.4.315 Clarke, S. (2012). Safety leadership: A meta-analytic review of transformational and transactional leadership styles as antecedents of safety behaviours. Journal of Occupational and Organizational Psychology, 86(1), 22–49. https://doi.org/10.1111/j.2044- 8325.2012.02064.x Cunradi, C., Todd, M., Duke, M., & Ames, G. (2008). Problem drinking, unemployment, and intimate partner violence among a sample of construction industry workers and their partners. Journal of Family Violence, 24(2), 63–74. https://doi.org/10.1007/s10896-008- 9209-0 Daba, C., Gebrehiwot, M., Asefa, L., Lemma, H., Atamo, A., Kebede, E., & Debela, S. (2022). Occupational safety of janitors in Ethiopian university during COVID-19 pandemic: Results from observational study. Frontiers in Public Health, 10. https://doi.org/10.3389/fpubh.2022.895977 Dabirian, S., Han, S. H., & Lee, J. (2020). Stochastic-based noise exposure assessment in modular and off-site construction. Journal of Cleaner Production, 244, 118758. Daniel, J. F. (2017) What Is a Safe Noise Level for the Public?. Am J Public Health, 107(1), 44– 45 Davila, F. V. (2022). Lighting strategies for nighttime construction and maintenance activities on roadways [Doctoral dissertation, Lyles School of Civil Engineering, Purdue University]. de Araújo, A. G., Gusmão, A. D., Rabbani, E. R. K., & Fucale, S. P. (2012). Mapping of noise impact provoked by the execution of foundation piles at high rise building sites. Work, 41(Suppl. 1), 3291–3300. de Salis, M. H. F., Oldham, D. J., & Sharples, S. (2002). Noise control strategies for naturally ventilated buildings. Building and Environment, 37(5), 471–484. Dobie, R. A., & Clark, W. W. (2014). Exchange rates for intermittent and fluctuating occupational noise: A systematic review of studies of human permanent threshold shift. Ear and Hearing, 35(1), 86–96. Elizalde, R. R. (2022). Asbestos presence in 20th century buildings. Journal of Engineering and Applied Science Technology, 4, 1–14. https://doi.org/10.47363/JEAST/2022(4)153 Emenike, G. C. and Sampson, A. P. (2017). Noise Levels and quality of livelihoods in residential neighbourhoods of port harcourt metropolis, Nigeria. European journal of health and environment, 4(1), 19-28 IJEMT Environment Protection Authority Victoria. (2020). Civil construction, building and demolition guide (Publication No. 1834). https://www.epa.vic.gov.au/about-epa/publications/1834 Esmaeili, B., & Hallowell, M. (2012). Attribute-based risk model for measuring safety risk of struck-by accidents. Construction Research Congress, 289–298. https://doi.org/10.1061/9780784412329.030 Fada, P.O. and Osiasanya, A. (2017). Effects of industrial noise pollution on the auditory performance and health status of industrial workers in Oluyole Industrial Estate, Ibadan, Nigeria. Academia Journal of Educational Research, 5(6), 092-100 Farouq, A. U., (2018). Grinding Machine Operator’s Noise Exposure Levels at Refinery Road Market, Effurun Delta State, Nigeria. International Research Journal of Advanced Engineering and Science, 3(1), 72-75 Feher, J., Cambal, J., Cvoliga, M., Kacmar, L., Sulovec, V., Suver, M., & et al. (2019). Impacts of noise and technical seismicity from blasting works during tunnel construction on the surrounding environment. Acta Montanistica Slovaca, 24(2), 151–161. Fish, D., & Black, I. (2013). Novel noise prediction technique for demolition saves time and money. Sound & Vibration, 11. Flynn, M. A., & Sampson, J. M. (2012). Trench safety — Using a qualitative approach to understand barriers and develop strategies to improve trenching practices. International Journal of Construction Education and Research, 8, 63–79. https://doi.org/10.1080/15578771.2011.619718 Gallon, V., Le Cann, P., Sanchez, M., Dematteo, C., & Le Bot, B. (2020). Emissions of VOCs, SVOCs, and mold during the construction process: Contribution to indoor air quality and future occupants' exposure. Indoor Air, 30, 691–710. https://doi.org/10.1111/ina.12661 Gambatese, J., Behm, M., & Hinze, J. (2005). Viability of designing for construction worker safety. Journal of Construction Engineering and Management, 131(9), 1029–1036. https://doi.org/10.1061/0733-9364(2005)131:9(1029) Gao, C., Holmér, I., & Abeysekera, J. (2008). Slips and falls in a cold climate: Underfoot surface, footwear design and worker preferences for preventive measures. Applied Ergonomics, 39, 385–391. https://doi.org/10.1016/j.apergo.2008.02.014 Geetha M., and Ambika D., (2015): Study on Impact of Noise Pollution at Construction Job Site. International Journal of Latest Trends in Engineering and Technology, 5(1), 46 – 49 George, I. I., (2006). Evaluation of noise levels from various sources within zaria metropolis, kaduna state, nigeria. department of water resources and environmental engineering, Faculty of engineering Ahmadu bello university, Zaria Nigeria Ghasemi, F., Mohammadfam, I., Soltanian, A., Mahmoudi, S., & Zarei, E. (2015). Surprising incentive: An instrument for promoting safety performance of construction employees. Safety and Health at Work, 6(3), 227–232. https://doi.org/10.1016/j.shaw.2015.02.006 Gilchrist, A., Allouche, E. N., & Cowan, D. (2003). Prediction and mitigation of construction noise in an urban environment. Canadian Journal of Civil Engineering, 30(4), 659–672. Gilliver, M., & Williams, W. (2009). Noise exposure and the construction industry. Journal of Occupational Health and Safety, 25(3), 187. Giunta, M. (2020). Assessment of the Impact of CO, NOx and PM10 on Air Quality during Road Construction and Operation Phases. Sustainability, 12(10549), 1-14 Goh, Y. M., & Chua, D. K. (2010). Case-based reasoning approach to construction safety hazard identification: Adaptation and utilization. Journal of Construction Engineering and Management, 136, 170–178. https://doi.org/10.1061/CO.1943-7862.0000116 IJEMT Goh, Y. M., & Sa'adon, N. F. (2015). Cognitive factors influencing safety behavior at height: A multimethod exploratory study. Journal of Construction Engineering and Management, 141, 04015003. https://doi.org/10.1061/CO.1943-7862.0000972 Golovina, O., Teizer, J., & Pradhananga, N. (2016). Heat map generation for predictive safety planning: Preventing struck-by and near miss interactions between workers-on-foot and construction equipment. Automation in Construction, 71, 99–115. https://doi.org/10.1016/j.autcon.2016.04.005 Granneman, J. H. (2013). Construction noise: Overview of regulations of different countries. INTER-NOISE and NOISE-CON Congress and Conference Proceedings, 247, 4892–4900. Greenspan, C. A., Moure-Eraso, R., Wegman, D. H., & Oliver, L. C. (1995). Occupational hygiene characterization of a highway construction project: A pilot study. Applied Occupational and Environmental Hygiene, 10(1), 50–58. Grill, M., Nielsen, K., Grytnes, R., Pousette, A., & Törner, M. (2018). The leadership practices of construction site managers and their influence on occupational safety: An observational study of transformational and passive/avoidant leadership. Construction Management and Economics, 37(5), 278–293. https://doi.org/10.1080/01446193.2018.1526388 Grill, M., Pousette, A., Nielsen, K., Grytnes, R., & Törner, M. (2017). Safety leadership at construction sites: The importance of rule-oriented and participative leadership. Scandinavian Journal of Work, Environment & Health, 43(4), 375–384. https://doi.org/10.5271/sjweh.3650 Hagberg, M., Burström, L., Ekman, A., & Vilhelmsson, R. (2006). The association between whole body vibration exposure and musculoskeletal disorders in the Swedish work force is confounded by lifting and posture. Journal of Sound and Vibration, 298, 492–498. https://doi.org/10.1016/j.jsv.2006.06.012 Hammad, A. W. A., & Akbarnezhad, A. (2016). A multi-objective mixed integer nonlinear programming model for construction site layout planning to minimise noise pollution and transport costs. Automation in Construction, 61, 73–85. Hammad, A. W. A., Akbarnezhad, A., Wu, P., Wang, X., & Haddad, A. (2019). Building information modelling-based framework to contrast conventional and modular construction methods through selected sustainability factors. Journal of Cleaner Production, 228, 1264–1281. Hamoda, M. F. (2008). Modeling of construction noise for environmental impact assessment. Journal of Construction in Developing Countries, 13(1), 79–89. Hanna, E., & Markham, S. (2019). Constructing better health and wellbeing? Understanding structural constraints on promoting health and wellbeing in the UK construction industry. International Journal of Workplace Health Management, 12(3), 146–159. https://doi.org/10.1108/IJWHM-03-2018-0031 Haron, Z., & Yahya, K. (2009). Monte Carlo analysis for prediction of noise from a construction site. Journal of Construction in Developing Countries, 14(1). Haron, Z., Yahya, K., & Jahya, Z. (2012). Prediction of noise pollution from construction sites at the planning stage using simple prediction charts. Energy Education Science and Technology Part A: Energy Science and Research, 29(2), 989–1002. Hasanzadeh, S., Esmaeili, B., & Dodd, M. D. (2018). Examining the relationship between construction workers' visual attention and situation awareness under fall and tripping hazard conditions: Using mobile eye tracking. Journal of Construction Engineering and Management, 144, 04018060. https://doi.org/10.1061/CO.1943-7862.0001506 IJEMT Heydari, M., Heravi, G., Raeisinafchi, R., & Karimi, H. (2024). A dynamic model to assess the role of site supervision systems in the safety performance of construction projects. Journal of Construction Engineering and Management, 150, 04024001. https://doi.org/10.1061/JCEMD4.COENG-13936 Hinze, J. W., & Teizer, J. (2011). Visibility-related fatalities related to construction equipment. Safety Science, 49, 709–718. https://doi.org/10.1016/j.ssci.2011.01.007 Hinze, J., Huang, X., & Terry, L. (2005). The nature of struck-by accidents. Journal of Construction Engineering and Management, 131, 262–268. https://doi.org/10.1061/0733-9364(2005)131:2(262) Hong, A., Kim, B., & Widener, M. (2020). Noise and the city: Leveraging crowdsourced big data to examine the spatio-temporal relationship between urban development and noise annoyance. Environment and Planning B: Urban Analytics and City Science, 47(7), 1201– 1218. Hong, J., Kang, H., Hong, T., Park, H. S., & Lee, D.-E. (2021). Development of a prediction model for the proportion of buildings exposed to construction noise in excess of the construction noise regulation at urban construction sites. Automation in Construction, 125, 103656. Hong, O., Chin, D. L., Fiola, L. A., & Kazanis, A. S. (2013). The effect of a booster intervention to promote hearing protection behavior in operating engineers. American Journal of Industrial Medicine, 56(2), 258–266. Hong, O., Chin, D. L., Kerr, M. J., & Ronis, D. L. (2012). Stages of change in hearing-protection behavior, cognition, and hearing status. American Journal of Health Behavior, 36(6), 811– 822. Hong, T., Ji, C., Park, J., Leigh, S.-B., & Seo, D. (2015). Prediction of environmental costs of construction noise and vibration at the preconstruction phase. Journal of Management in Engineering, 31(5), 4014079. House, R. A., Sauvé, J. T., & Jiang, D. (2010). Noise-induced hearing loss in construction workers being assessed for hand-arm vibration syndrome. Canadian Journal of Public Health, 101, 226–229. https://doi.org/10.1007/BF03404378 Ibekwe, T., Folorunso, D., Ebuta, A., Amodu, J., Nwegbu, M., Mairami, N., Liman, I., et al. (2016). Evaluation of environmental noise levels in Abuja Municipality using mobile phones. Annals of Ibadan Postgraduate Medicine, 14(2), 58–64. Ibrahim, A. D. and Musa-Haddary, Y. G. (2010). Concept of Value for Money in Public Infrastructure Development. In International Workshop on PPP Approach for Infrastructure Development in Nigeria. Ibrahim, A., El-Anwar, O., & Marzouk, M. (2018). Socioeconomic impact assessment of highly dense-urban construction projects. Automation in Construction, 92, 230–241. International Organization for Standardization. (2009). Acoustics — Determination of occupational noise exposure — Engineering method (ISO 9612:2009). Iwuoha, C. P. and Avwiri, E. (2022). Evaluation of Noise Pollution on Health in Low and High Density Residential Area of Port Harcourt Metropolis. International Journal of Innovative Education Research, 10(2), 91-98 Jacyna, M., Wasiak, M., Lewczuk, K. and Karon, G. (2017). Noise and environmental pollution from transport: decisive problems in developing ecologically efficient transport systems. Journal Of Vibro engineering, 19, 5939-5949 Jannadi, O. A. (2008). Risks associated with trenching works in Saudi Arabia. Building and Environment, 43, 776–781. https://doi.org/10.1016/j.buildenv.2007.01.032 IJEMT Jariwala, H. J., Huma, S. S., Minarva, J. P. and Yogesh, M. G. (2017). Noise Pollution & Human Health : A Review. Jariwala, H. J., Huma, S. S., Minarva, J. P. and Yogesh, M. G. (2017). Noise Pollution & Human Health: A Review. Noise Pollution & Human Health: A Review. Jeon, J. Y., Lee, P. J., You, J., & Kang, J. (2010). Perceptual assessment of quality of urban soundscapes with combined noise sources and water sounds. Journal of the Acoustical Society of America, 127(3), 1357–1366. Jeong, J. H., Din, N. C., Otsuru, T., & Kim, H. C. (2010). An application of a noise maps for construction and road traffic noise in Korea. International Journal of Physical Sciences, 5(7), 1063–1073. Jeremiah, T. A. and Paul, A. K. (2014). Stress Among Academic Staff in a Nigerian University. Covenant Journal of Business and Social Sciences , 65(1), 73-91 Jhanwar, D. (2016). Effect of Noise in Busy Areas of Warri. Journal of Environment Pollution and Human Health 4(3), 72–77 Jiang, L., Zhao, T., Zhang, W., & Hu, J. (2021). System hazard analysis of tower crane in different phases on construction site. Advances in Civil Engineering, 2021, 1–16. https://doi.org/10.1155/2021/6661261 Jing, M., Chunjiang, L., Mei-po, K. and Yanwei, C. (2018). A Multilevel Analysis of Perceived Noise Pollution, Geographic Contexts and Mental Health in Beijing. Int. J. Environ. Res. Public Health, 15(1479), 1-18 Jo, B., Lee, Y., Kim, J., Kim, D., & Choi, P. (2017). Proximity warning and excavator control system for prevention of collision accidents. Sustainability, 9(8), 1488. https://doi.org/10.3390/su9081488 Jung, S., Kang, H., Choi, J., Hong, T., Park, H. S., & Lee, D.-E. (2020). Quantitative health impact assessment of construction noise exposure on the nearby region for noise barrier optimization. Building and Environment, 176, 106869. Kalawapudi, K., Singh, T., Vijay, R., Goyal, N. and Kumar, R. (2020). Noise pollution in Mumbai Metropolitan Region : An emerging environmental threat. Environmental Monitoring and Assessment, https://www.researchgate.net/publication/379017321_Assessment_of_Noise_Levels_and _Perceptions_of_Its_Health_Impact_at_Kejetia_Market_in_Ghana Kang, H., Sung, S., Hong, J., Jung, S., Hong, T., Park, H. S., & et al. (2021). Development of a real-time automated monitoring system for managing the hazardous environmental pollutants at the construction site. Journal of Hazardous Materials, 402, 123483. Kantová, R. (2017). Construction machines as a source of construction noise. Procedia Engineering, 190, 92–99. https://doi.org/10.1016/j.proeng.2017.05.308 Karthick, S., Kermanshachi, S., & Loganathan, K. (2022). Effect of cold temperatures on health and safety of construction workers. Tran-SET 2022, 237–247. Karthick, S., Kermanshachi, S., & Namian, M. (2022). Physical, mental, and emotional health of construction field laborers working in extreme weather conditions: Challenges and overcoming strategies [Conference presentation]. Construction Research Congress 2022, Arlington, VA, USA. Karthick, S., Kermanshachi, S., & Pamidimukkala, A. (2023). Analysis of the health and safety challenges faced by construction workers in extreme hot weather conditions. Journal of Legal Affairs and Dispute Resolution in Engineering and Construction, 15, 04522048. https://doi.org/10.1061/JLADAH.LADR-942 IJEMT Karthick, S., Kermanshachi, S., Pamidimukkala, A., & Namian, M. (2023). A review of construction workforce health challenges and strategies in extreme weather conditions. International Journal of Occupational Safety and Ergonomics, 29, 773–784. https://doi.org/10.1080/10803548.2022.2046673 Kasim, F. O., Adekunle, M. A., Sunday, W. (2020). Risk assessment for hazard exposure and its consequences on housing construction sites in Lagos, Nigeria. Acta Structilia, 27(1), 59- 84 Kelloway, E., Mullen, J., & Francis, L. (2006). Divergent effects of transformational and passive leadership on employee safety. Journal of Occupational Health Psychology, 11(1), 76–86. https://doi.org/10.1037/1076-8998.11.1.76 Kermanshachi, S., Nipa, T. J., & Dao, B. (2023). Development of complexity management strategies for construction projects. Journal of Engineering, Design and Technology, 21, 1633–1657. https://doi.org/10.1108/JEDT-05-2021-0268 Kheni, N., Dainty, A., & Gibb, A. (2008). Health and safety management in developing countries: A study of construction SMEs in Ghana. Construction Management and Economics, 26(11), 1159–1169. https://doi.org/10.1080/01446190802459916 Kim, J. T., & Yu, C. W. (2014). Hazardous materials in buildings. Indoor and Built Environment, 23, 44–61. https://doi.org/10.1177/1420326X13480240 Kim, J., Shan, Y., Kim, S., Song, D., Park, H., & Bang, C. (2021). Factors influencing fire safety on building construction sites: A fire officer's perspective. Journal of Construction Engineering and Management, 147, 04021118. https://doi.org/10.1061/CO.1943- 7862.0002153 Kim, S., & Kim, S.-A. (2021). Design optimization of noise barrier tunnels through component reuse: Minimization of costs and CO2 emissions using multiobjective genetic algorithm. Journal of Cleaner Production, 298, 126697. Kim, S.-H., Hong, S.-Y., Song, J.-H., & Joo, W.-H. (2012). Interior noise analysis of a construction equipment cabin based on airborne and structure-borne noise predictions. Journal of Mechanical Science and Technology, 26(4), 1003–1009. Koushki, P. A., Kartam, N., & Al-Mutairi, N. (2004). Workers' perceptions and awareness of noise pollution at construction sites in Kuwait. Civil Engineering and Environmental Systems, 21(2), 127–136. Kumar, C., Sakthivel, M., Elangovan, R., & Arularasu, M. (2015). Analysis of material handling safety in construction sites and countermeasures for effective enhancement. The Scientific World Journal, 2015, 1–7. https://doi.org/10.1155/2015/742084 Kwon, N. (2018). Construction noise management during preconstruction [Doctoral dissertation, Seoul National University]. Kwon, N., Cho, J., Lee, H.-S., Yoon, I., & Park, M. (2019). Compensation cost estimation model for construction noise claims using case-based reasoning. Journal of Construction Engineering and Management, 145(8), 4019047. Kwon, N., Lee, J., Park, M., Yoon, I., & Ahn, Y. (2019). Performance evaluation of distance measurement methods for construction noise prediction using case-based reasoning. Sustainability, 11(3), 871. Kwon, N., Park, M., Lee, H.-S., Ahn, J., & Kim, S. (2017). Construction noise prediction model based on case-based reasoning in the preconstruction phase. Journal of Construction Engineering and Management, 143(6), 4017008. IJEMT Kwon, N., Park, M., Lee, H.-S., Ahn, J., & Shin, M. (2016). Construction noise management using active noise control techniques. Journal of Construction Engineering and Management, 142(7), 4016014. Kwon, N., Song, K., Lee, H.-S., Kim, J., & Park, M. (2018). Construction noise risk assessment model focusing on construction equipment. Journal of Construction Engineering and Management, 144(6), 4018034. Lee, H. P., Wang, Z., & Lim, K. M. (2017). Assessment of noise from equipment and processes at construction sites. Building Acoustics, 24(1), 21–34. Lee, P. J., & Jeon, J. Y. (2011). Evaluation of speech transmission in open public spaces affected by combined noises. Journal of the Acoustical Society of America, 130(1), 219–227. Lee, S. C., Hong, J. Y., & Jeon, J. Y. (2015). Effects of acoustic characteristics of combined construction noise on annoyance. Building and Environment, 92, 657–667. Lewkowski, K., Heyworth, J., McCausland, K., & Williams, W. (2017). Predictors of noise exposure in construction workers. Li, X., Song, Z., Wang, T., Zheng, Y., & Ning, X. (2016). Health impacts of construction noise on workers: A quantitative assessment model based on exposure measurement. Journal of Cleaner Production, 135, 721–731. Lin, Y., Chen, C., & Luo, J. (2008). Gender and age distribution of occupational fatalities in Taiwan. Accident Analysis & Prevention, 40(4), 1604–1610. https://doi.org/10.1016/j.aap.2008.04.008 Liu, G. (2018). Types of environmental pollution caused by real estate construction projects and their control measures. Nature Environment and Pollution Technology, 17(3), 1035–1041. Liu, L., Liu, J., & Yao, Y. (2021). Safety risk assessment of tower crane construction based on fuzzy Bayesian network. ICCREM 2021, 147–154. https://doi.org/10.1061/9780784483954.016 Liu, S., Nkrumah, E., Akoto, L., Gyabeng, E., & Nkrumah, E. (2020). The state of occupational health and safety management frameworks and occupational injuries and accidents in the Ghanaian oil and gas industry: Assessing the mediating role of safety knowledge. BioMed Research International, 2020, 1–14. https://doi.org/10.1155/2020/6354895 Liu, T. X., Liu, Z. B., & Zheng, J. H. (2014). Application of game theory in night construction noise control. Applied Mechanics and Materials, 535, 250–254. Lu, X., & Davis, S. (2016). How sounds influence user safety decisions in a virtual construction simulator. Safety Science, 86, 184–194. Lyu, S., Hon, C., Chan, A., Wong, F., & Javed, A. (2018). Relationships among safety climate, safety behavior, and safety outcomes for ethnic minority construction workers. International Journal of Environmental Research and Public Health, 15(3), 484. https://doi.org/10.3390/ijerph15030484 Mahesh, G. (2019). Developing a knowledge-based safety culture instrument for construction industry. Engineering Construction & Architectural Management, 26(11), 2597–2613. https://doi.org/10.1108/ECAM-09-2018-0383 Manatakis, E., & Skarlatos, D. (2002). A statistical model for evaluation and prediction of the noise exposure in a construction equipment area. Applied Acoustics, 63(7), 759–773. Mangalekar, S. B., Jadhav, A. S. and Raut, P. D. (2012). Study of Noise Pollution in Kolhapur City. Maharashtra, India 2(1), 65-69 IJEMT Marinaccio, A., Scortichini, M., Gariazzo, C., Leva, A., Bonafede, M., De'Donato, F. K., Stafoggia, M., Viegi, G., Michelozzi, P., & Carla, A. (2019). Nationwide epidemiological study for estimating the effect of extreme outdoor temperature on occupational injuries in Italy. Environment International, 133, 105176. https://doi.org/10.1016/j.envint.2019.105176 Martinelli, K. (2019). A Guide to the Most Common Workplace Hazards. https://www.highspeedtraining.co.uk/hub/hazards-in-the-workplace/ Mawanza, W. (2016). The Effects of Stress on Employee Productivity: A Perspective of Zimbabwe’s Socio-Economic Dynamics of 2016. Journal of Economics and Behavioral Studies 9(2), 22-32 Mbaegbu, N. O., Ede, A. O., Oparaocha, R., Orji, S. M., Opara, E. C., Akpelu, A. U., Abonyi, I. C., Ilo, C. I., Nwankwo, C. J. and Aronu, C. N. (2021). Assessment of noise pollution and its perceived health risks on residents of Owerri Metropolis, Imo State, Nigeria. World Journal of Advanced Research and Reviews, 10(02), 146–156 Mikkelsen, K., Spangenberg, S., & Kines, P. (2010). Safety workarounds predict injury risk and reduce injury rates in the construction industry. American Journal of Industrial Medicine, 53(6), 601–607. https://doi.org/10.1002/ajim.20803 Mir, M., Nasirzadeh, F., Bereznicki, H., Enticott, P., Lee, S., & Mills, A. (2023). Construction noise effects on human health: Evidence from physiological measures. Sustainable Cities and Society, 91, 104470. https://doi.org/10.1016/j.scs.2023.104470 Mohamed, M. (2021). A study of noise pollution and impact on human health. International Journal of Multidisciplinary Current Research, 9, 610–614. https://doi.org/10.14741/ijmcr/v.9.6.3 Mohammadizadeh, M., Ahmadi, S. H., Sekhavati, E. and Ahani-Jegar, K. (2015). Noise pollution effect in flour factory on workers’ hearing in Lamerd City. Journal of Medicine and Life, 8(3), 208-211 Molewa, M., Mbonane, T., Shirinde, J., & Masekameni, D. (2021). Assessment of occupational health and safety practices at government mortuaries in Gauteng province: A cross- sectional study. Pan African Medical Journal, 38. https://doi.org/10.11604/pamj.2021.38.76.21699 Mora, Z., Suharyanto, A., & Yahya, M. (2020). Effect of work safety and work healthy towards employee's productivity in PT. Sisirau Aceh Tamiang. Budapest International Research and Critics Institute (BIRCI-Journal): Humanities and Social Sciences, 3(2), 753–760. https://doi.org/10.33258/birci.v3i2.887 Mosly, I., & Makki, A. (2020). Safety climate perceptions in the construction industry of Saudi Arabia: The current situation. International Journal of Environmental Research and Public Health, 17(18), 6717. https://doi.org/10.3390/ijerph17186717 Mudiyanselage, S. E., Nguyen, P. H. D., Rajabi, M. S., & Akhavian, R. (2021). Automated workers' ergonomic risk assessment in manual material handling using sEMG wearable sensors and machine learning. Electronics, 10, 2558. https://doi.org/10.3390/electronics10202558 Münzel, T., Molitor, M., Kuntic, M., & et al. (2024). Transportation noise pollution and cardiovascular health. Circulation Research, 134(9), 1113–1135. https://doi.org/10.1161/CIRCRESAHA.123.323584 IJEMT Münzel, T., Sørensen, M., & Daiber, A. (2021). Transportation noise pollution and cardiovascular disease. Nature Reviews Cardiology, 18(9), 619–636. https://doi.org/10.1038/s41569-021- 00532-5 Musa, M. A. and Ayeni, O. (2022). Occupational hazards and PPE compliance on Nigerian construction sites. African Journal of Occupational Health and Safety, 8(1), 45–61. Nadeem, A. S. (2019). Knowledge, attitude and practice survey regarding noise-induced hearing loss in air and ground crew of pakistan air force base masroor. Pak Armed Forces Med, 69(4), 742-47 Najaa, A. I., Nur, S. F. and Mirta, M. (2023). Correlation between noise-related risk perception, knowledge and the use of hearing protection device: A case study among landfill workers. AIP Conference Proceedings, 2682(1), 1-10 Naji, G., Isha, A., Alazzani, A., Brough, P., Saleem, M., Mohyaldinn, M., & Alzoraiki, M. (2022). Do leadership, organizational communication, and work environment impact employees' psychosocial hazards in the oil and gas industry? International Journal of Environmental Research and Public Health, 19(8), 4432. https://doi.org/10.3390/ijerph19084432 Namrata, R. N. and Kimbe, R. K. (2018). Flour Mill Workers Occupational Noise Exposure in Chandrapur City, Central India. International Journal of Environment, 7(1), 1-13 Naqvi, S. M. H., Khan, M. A., Kant, A. and Khan, S. N. (2013). Job stress and employees’ productivity: case of Azad Kashmir public health sector. Interdisciplinary journal of contemporary research in business 5(3), 525-542 Narendra, S., and Davar, S. C., (2004). Noise Pollution- Sources, Effects and Control. J. Hum. Ecol., 16(3), 181-187 National Institute for Occupational Safety and Health. (1998). Occupational noise exposure (DHHS Publication No. 98-126). U.S. Department of Health and Human Services. https://www.cdc.gov/niosh/docs/98-126/ National Institute for Occupational Safety and Health. (2018). Reducing noise exposure: Noise controls. U.S. Department of Health and Human Services. https://www.cdc.gov/niosh/topics/noise/reducenoiseexposure/noisecontrols.html Neitzel, R., & Seixas, N. (2005). The effectiveness of hearing protection among construction workers. Journal of Occupational and Environmental Hygiene, 2(4), 227–238. Neitzel, R., Seixas, N. S., Camp, J., & Yost, M. (1999). An assessment of occupational noise exposures in four construction trades. American Industrial Hygiene Association Journal, 60(6), 807–817. Newbury, J. B., Heron, J., Kirkbride, J. B., & et al. (2024). Air and noise pollution exposure in early life and mental health from adolescence to young adulthood. JAMA Network Open, 7(5), e2412169. Nikbakht, M. V., Gheibi, M., Montazeri, H., & et al. (2024). Identification and ranking of factors affecting the delay risk of high-rise construction projects using AHP and VIKOR methods. Infrastructures, 9(2), 24. https://doi.org/10.3390/infrastructures9020024 Ning, X., Qi, J., & Wu, C. (2018). A quantitative safety risk assessment model for construction site layout planning. Safety Science, 104, 246–259. Ning, X., Qi, J., Wu, C., & Wang, W. (2019). Reducing noise pollution by planning construction site layout via a multi-objective optimization model. Journal of Cleaner Production, 222, 218–230. IJEMT Nnaji, C., Jafarnejad, A., & Gambatese, J. (2020). Effects of wearable light systems on safety of highway construction workers. Practice Periodical on Structural Design and Construction, 25, 04020003. https://doi.org/10.1061/SC.1943-5576.0000468 Obiefuna, J. N., Kuba, J. B. and Obieguna, C. J. (2018). Acoustic over-exposure versus human health: A case study of Dangote flour mill, Calabar, Cross River state. Environmental Pollution and Protection, 3(1), 1-12. Obrenovic, B., Jianguo, D., Khudaykulov, A., & et al. (2020). Work-family conflict impact on psychological safety and psychological well-being: A job performance model. Frontiers in Psychology, 11. https://doi.org/10.3389/fpsyg.2020.00475 Occupational Safety and Health Administration. (2013). OSHA technical manual section III: Chapter 5 — Noise. U.S. Department of Labor. https://www.osha.gov/otm/section-3- health-hazards/chapter-5 Ogundepi, K. E., Owolabi, D. J., Olanipekun, E. A., Olaniran, H. F., Akuete, E. and Fagbele, A. O. (2018). Factors Affecting Effective use of Safety Wears among Construction Site Operatives: Lessons from Indigenous Firms in South Western Nigeria. International Journal of Applied Engineering Research 13(6), 4314-4325 Ojekunle, O. Z. and Lateef, S. T. (2017). Environmental Impact of Abattoir Waste Discharge on the Quality of Surface Water and Ground Water in Abeokuta. J Environ Anal Toxicol 7(509), 1- 12 Okike, E. (2007). Corporate governance in Nigeria: The status quo. Corporate Governance: An International Review, 15(2), 173–193. https://doi.org/10.1111/j.1467-8683.2007.00553.x Olanrewaju, A. L. and Abdul-Aziz, A. R. (2015). Building Maintenance Processes, Principles, Procedures, Practices and Strategies. In Building Maintenance Processes and Practices. 79- 129. Springer Singapore. Olaosun, A.O., Ogundiran, O. and Tobih, J.E. (2009). Health Hazards of Noise: A Review Article. Research Journal of Medical Sciences, 3(3), 115-122 Oraegbune, O. M., Adole, A. M. and Adeyemo, V. O. (2017). An Appraisal of Psychotropic Drugs and their Consequences among the Construction Industry Workers in Nigeria, Adamawa State Case Study. Nigerian Journal of Technology, 36(1), 241 – 251 Ota, L., Firn, J., Chazdon, R., Gregorio, N., Mukul, S., Viani, R., & Herbohn, J. (2021). Using leading and lagging indicators for forest restoration. Journal of Applied Ecology, 58(9), 1806–1812. https://doi.org/10.1111/1365-2664.13938 Ouis, D. (2002). Annoyance caused by exposure to road traffic noise: An update. Noise and Health, 4(15), 69. Oviasogie, A. C. and Ikudayisi, A. E. (2018). Comparative Assessment of Noise Sources in Two Residential Neighbourhoods in Benin City, Nigeria. International Journal of Environment and Pollution Research, 7(4), 21-28 Oviasughie, A. C. and Ikudayisi, A. E. (2019). Comparative assessment of noise sources in two residential neighbourhoods in Benin city, Nigeria. International Journal of Environment and Pollution Research, 7(4), 21-28 Oyedepo, S. O. (2012). Effective Noise Control Measure and Sustainable Development in Nigeria. World Journal of Environmental Engineering, 1(1), 5-15 Oyedepo, S. O. (2013). Effective Noise Control Measure and Sustainable Development in Nigeria. World Journal of Environmental Engineering, 1(1), 5-15 Pamidimukkala, A., & Kermanshachi, S. (2023). Occupational challenges of women in construction industry: Development of overcoming strategies using Delphi technique. IJEMT Journal of Legal Affairs and Dispute Resolution in Engineering and Construction, 15, 04522028. https://doi.org/10.1061/JLADAH.LADR-939 Pamidimukkala, A., & Kermanshachi, S. (2023, June 14–17). Virtual reality training for geological and mining workers to prevent powered haulage accidents [Conference presentation]. International Conference on Transportation and Development, Austin, TX, USA. Pethaperumal, H., & Sivakumar, N. (2017). Effectiveness of mechanical material handling equipment safety in construction sites for operation safety and environmental health. International Journal of Applied Environmental Sciences, 12, 541–552. Pirrera, S., DeValck, E. and Cluydts, R. (2010). Nocturnal road traffic noise: A review on its assessment and consequences on sleep and health. Environ. Int, 36(2010), 492–498 Quesada, J. M. A., Lloves, J. M., & Delgado, D. V. (2020). Ocular chemical burns in the workplace: Epidemiological characteristics. Burns, 46, 1212–1218. https://doi.org/10.1016/j.burns.2019.12.005 Quinlan, M., Mayhew, C., & Bohle, P. (2001). The global expansion of precarious employment, work disorganization, and consequences for occupational health: A review of recent research. International Journal of Health Services, 31(2), 335–414. https://doi.org/10.2190/607H-TTV0-QCN6-YLT4 Rafindadi, A. D., Napiah, M., Othman, I., Mikić, M., Haruna, A., Alarifi, H., & Al-Ashmori, Y. Y. (2022). Analysis of the causes and preventive measures of fatal fall-related accidents in the construction industry. Ain Shams Engineering Journal, 13, 101712. https://doi.org/10.1016/j.asej.2021.11.008 Rafindadi, A. D., Shafiq, N., Othman, I., Aliyu, M. M., Mikić, M., & Alarifi, H. (2023). Data mining of the essential causes of different types of fatal construction accidents. Heliyon, 9. https://doi.org/10.1016/j.heliyon.2023.e13785 Rahmat, A. K., Ibrahim, I., Senathirajah, A. R. S., & et al. (2023). The relationship between green management commitment and effectiveness of occupational safety and health committee. International Journal of Professional Business Review, 8(4), e0933. https://doi.org/10.26668/businessreview/2023.v8i4.933 Rajabi, M. S., Taghaddos, H., & Zahrai, S. M. (2022). Improving emergency training for earthquakes through immersive virtual environments and anxiety tests: A case study. Buildings, 12, 1850. https://doi.org/10.3390/buildings12111850 Rashidi Nasab, A., Malekitabar, H., Elzarka, H., Nekouvaght Tak, A., & Ghorab, K. (2023). Managing safety risks from overlapping construction activities: A BIM approach. Buildings, 13, 2647. https://doi.org/10.3390/buildings13102647 Reis, C. M., Oliveira, C., Novais, S., & Silva, P. (2016). Asbestos application in construction. Occupational Safety and Hygiene IV, 567–572. https://doi.org/10.1201/b21172-99 Rempel, D., Antonucci, A., Barr, A., Cooper, M. R., Martin, B., & Neitzel, R. L. (2019). Pneumatic rock drill vs. electric rotary hammer drill: Productivity, vibration, dust, and noise when drilling into concrete. Applied Ergonomics, 74, 31–36. Rey-Merchán, M. D. C., Gómez-de-Gabriel, J. M., Fernández-Madrigal, J. A., & López-Arquillos, A. (2022). Improving the prevention of fall from height on construction sites through the combination of technologies. International Journal of Occupational Safety and Ergonomics, 28, 590–599. https://doi.org/10.1080/10803548.2020.1799789 IJEMT Roberts, B., Seixas, N. S., Mukherjee, B., & Neitzel, R. L. (2018). Evaluating the risk of noise- induced hearing loss using different noise measurement criteria. Annals of Work Exposures and Health, 62(3), 295–306. Rubio-Romero, J. C., Rubio, M. C., & García-Hernández, C. (2013). Analysis of construction equipment safety in temporary work at height. Journal of Construction Engineering and Management, 139, 9–14. https://doi.org/10.1061/CO.1943-7862.0000560 Sabitu, K., Iliyasu, Z., & Dauda, M. (2009). Awareness of occupational hazards and utilization of safety measures among welders in Kaduna metropolis, northern Nigeria. Annals of African Medicine, 8(1), 46. https://doi.org/10.4103/1596-3519.55764 Sadeghi, J., & Vasheghani, M. (2021). Safety of buildings against train induced structure borne noise. Building and Environment, 197, 107784. https://doi.org/10.1016/j.buildenv.2021.107784 Sadeghi, N., Fayek, A. R., & Pedrycz, W. (2010). Fuzzy Monte Carlo simulation and risk assessment in construction. Computer-Aided Civil and Infrastructure Engineering, 25(4), 238–252. Safe Work Australia. (2019). Construction work: Code of practice. https://www.safeworkaustralia.gov.au/doc/model-codes-practice/model-code-practice- construction-work Saleh, S., Woskie, S., & Bello, A. (2017). The use of noise dampening mats to reduce heavy- equipment noise exposures in construction. Safety and Health at Work, 8(2), 226–230. Sampath, S., Muralis, S. D., and Kuma, V. S., (2004). Ambient Noise Levels in Major Cities in Kerala, Journal of Indian Geophysics Union, 8(4), 293-298. Sankar, S., Anandh, K., Rajendran, S., & Sen, K. (2022). The impact of various safety leadership styles on construction safety climate: A case of South India. IOP Conference Series: Earth and Environmental Science, 1101(4), 042005. https://doi.org/10.1088/1755- 1315/1101/4/042005 Sanni-Anibire, M. O., Mahmoud, A. S., Hassanain, M. A., & Salami, B. A. (2020). A risk assessment approach for enhancing construction safety performance. Safety Science, 121, 15–29. https://doi.org/10.1016/j.ssci.2019.08.044 Seixas, N. S., Ren, K., Neitzel, R., Camp, J., & Yost, M. (2001). Noise exposure among construction electricians. AIHA Journal, 62(5), 615–621. Seixas, N. S., Sheppard, L., & Neitzel, R. (2003). Comparison of task-based estimates with full- shift measurements of noise exposure. AIHA Journal, 64(6), 823–829. Seixas, N., Neitzel, R., Sheppard, L., & Goldman, B. (2005). Alternative metrics for noise exposure among construction workers. Annals of Occupational Hygiene, 49(6), 493–502. Seker, S., & Zavadskas, E. (2017). Application of fuzzy DEMATEL method for analysing occupational risks on construction sites. Sustainability, 9(11), 2083. https://doi.org/10.3390/su9112083 Seyhan, N., Keskin, M., & Savaci, N. (2012). Contact with wet cement: An unrecognised cause for chemical burn. Turkish Journal of Trauma and Emergency Surgery, 18, 189–191. https://doi.org/10.5505/tjtes.2012.17748 Shaikh, H. H., Zainun, N. Y., & Khahro, S. H. (2023). Impact of noise pollution at construction sites of Sindh Pakistan. E3S Web of Conferences, 437, 02003. https://doi.org/10.1051/e3sconf/202343702003 Shankar, N. and Balasubramanian, M. (2015). Assessment of risk in construction industry. International Research Journal of Engineering and Technology , 02(01), 68 – 72 IJEMT Shrestha, S. (2020). Occupational hazards in building construction. SCITECH Nepal, 15, 16–21. https://doi.org/10.3126/scitech.v15i1.34452 Simukonda, W., & Emuze, F. (2022). An offsite construction scoping study for occupational health and safety. IOP Conference Series: Earth and Environmental Science, 1101(3), 032015. https://doi.org/10.1088/1755-1315/1101/3/032015 Singh, D., Kumari, N. and Sharma, P. (2018). A review of adverse effects of road traffic noise on human health. Fuctuation and noise letters, 17(4), 1-10 Sivakumar, C., Malathy, R., & Sivaprakash, P. (2018). A study on fire safety on residential and commercial construction sites. Archives of Civil Engineering, 64, 161–174. https://doi.org/10.2478/ace-2018-0011 Slyers, S. (2011). Stress and Stressor. The Way Forward. Lagos. Lola Publishers. Sohrabi, S., Pàmies Gómez, T., & Romeu Garbí, J. (2020). Suitability of active noise barriers for construction sites. Applied Sciences, 10(18), 6160. Su, Y., Mao, C., Jiang, R., Liu, G., & Wang, J. (2021). Data-driven fire safety management at building construction sites: Leveraging CNN. Journal of Management in Engineering, 37, 04020108. https://doi.org/10.1061/ME.1943-5479.0000868 Suhaila and Janmaizatulriah (2023). Noise pollution near to the construction site in an urban area (a case study in Shah Alam). The Institution of Engineers, Malaysia, 83(2), 35 – 39 Suhaila, N. and Janmaizatulriah J. (2022). Noise pollution near to the construction site in an urban area (a case study in shah alam). Journal – The Institution of Engineers, Malaysia, 83(2), 35-39 Sun, C., Ahn, S., & Ahn, C. (2017). Investigating the impact of human risk taking tendency on the likelihood of struck-by accidents in construction using agent-based simulation. Computing in Civil Engineering, 2017, 306–314. https://doi.org/10.1061/9780784480847.038 Sun, Q., Turkan, Y., & Fischer, E. (2022, March 9–12). Integrating 4D BIM and FDS to simulate and assess fires in buildings under construction [Conference presentation]. Construction Research Congress 2022, Arlington, VA, USA. Suter, A. H. (1994). The relationship of the exchange rate to noise-induced hearing loss. Journal of the Acoustical Society of America, 95(5), 2861. Suter, A. H. (2002). Construction noise: Exposure, effects, and the potential for remediation; a review and analysis. AIHA Journal, 63(6), 768–789. Taibi, Y., Metzler, Y., Bellingrath, S., Neuhaus, C., & Müller, A. (2022). Applying risk matrices for assessing the risk of psychosocial hazards at work. Frontiers in Public Health, 10. https://doi.org/10.3389/fpubh.2022.965262 Tan, Y., Fang, Y., Zhou, T., Gan, V. J. L., & Cheng, J. C. P. (2019). BIM-supported 4D acoustics simulation approach to mitigating noise impact on maintenance workers on offshore oil and gas platforms. Automation in Construction, 100, 1–10. Tiwary, G., & Gangopadhyay, P. (2011). A review on the occupational health and social security of unorganized workers in the construction industry. Indian Journal of Occupational and Environmental Medicine, 15(1), 18. https://doi.org/10.4103/0019-5278.83003 Tsepav, M. T., Oladipupo, M. D. and Ndanusa, B. (2011). Assessment of the Level of Noise Produced by Sound Generating Machines in Lapai, Northern Nigeria. Advances in Applied Science Research, 2(6), 520-531 U.S. Bureau of Labor Statistics. (2020). Number and rate of fatal work injuries, by industry sector. https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of- fatal-work-injuries-by-industry.htm IJEMT Ugbebor J. N., Promise, N. and Yorkor, B. (2015). Evaluation of Construction Noise at Selected Highway Road Construction Sites in Urban City of Port Harcourt and Its Effects on Residential Environment. Journal of Environmental Science, Computer Science and Engineering & Technology, 4(2), 1-13 Ugbebor, J. N, and Yorkor, B. (2015). Evaluation of construction noise at selected highway road construction sites in urban city of Port Harcourt and its effects on residential environment. Journal of Environmental Science, Computer Science and Engineering & Technology, 4(2), 1-10.