Materials, Fabrication and Characterization of Poly (Lactic Acid) Composites

Lawal Usman; Abubakar Musa Yahaya; Adam Ansar Bilyaminu

doi:10.56201/wjimt.v10.no2.2026.pg47.60

📄 Download Paper

Materials, Fabrication and Characterization of Poly (Lactic Acid) Composites

Lawal Usman, a, Abubakar Musa Yahaya, b, and Adam Ansar Bilyaminu, b

Abstract

This manuscript describes the comprehensive methodology for fabricating and characterizing poly(lactic acid) composites. It provides a detailed account of the selection and specifications of all chemicals and materials used, ensuring clarity and reproducibility for future studies. The solvent-casting method is the primary fabrication technique described for both neat PLA films and their composites, emphasizing precise control over filler concentrations and drying conditions to achieve uniform, free-standing films. A wide range of characterization techniques is covered, including thermal analysis (Thermogravimetric Analysis and Differential Scanning Calorimetry), structural analysis (X-Ray Diffraction and Fourier Transform Infrared Spectroscopy), and morphological evaluation (Scanning Electron Microscopy and Transmission Electron Microscopy). Additional assessments, such as UV-Visible Spectrophotometry and Mechanical Analysis, are also included to evaluate functional properties. Each method includes specific operational parameters to offer a comprehensive understanding of material properties. Brief discussions on statistical approaches for data analysis ensure reliability and validity in the experimental findings. Overall, this chapter serves as a foundational resource for the experimental protocols and analytical methods relevant to PLA composites, enhancing knowledge of their potential applications.

Keywords

MethodologyFabricationPoly (lactic acid)CompositeCharacterization

References

[1] Lawal, U., Robert, V., Loganathan, S., Valapa, R. B. (2024) Poly (lactic acid)/Menadione Based Composite for Active Food Packaging Application. J. Polym. Environ., 1-17 [2] Lawal, U., Valapa, R. B. (2021). Bioplastics: An Introduction to the Role of Eco?Friendly Alternative Plastics in Sustainable Packaging. Bio?based Packaging, 319–334. doi:10.1002/9781119381228.ch18. Wiley [3] Jacob, J., Lawal, U., Thomas, S., Valapa, R. B. (2020). Biobased polymer composite from poly(lactic acid): processing, fabrication, and characterization for food packaging. Processing and Development of Polysaccharide-Based Biopolymers for Packaging Applications, 97–115. Elsevier [4] D. Arrua, M. C. Strumia, M. A. Nazareno (2010) Immobilization of caffeic acid on a polypropylene film: Synthesis and antioxidant properties. J. Agric. Food Chem. 58:9228? 9234. [5] S. Roy, J. W. Rhim (2020) Preparation of bioactive functional poly(lactic acid)/curcumin composite film for food packaging application. Int. J. Biol. Macromol. 162:1780-178. [6] Mei Z, Ping W, Hongyan S, Zuankai W, (2014) Superhydrophobic Surface with Hierarchical Architecture and Bimetallic Composition for Enhanced Antibacterial Activity. ACS Appl. Mater. Interfaces, 6:22108?22115. [7] G. Perotto, L. Ceseracciu, R. Simonutti, U. C. Paul, S. Guzman-Puyol, T.N. Tran, I.S. Bayer, A. Athanassiou (2018) Bioplastics from vegetable waste: Via an eco- friendly water- based process. Green Chem. 20:894?902. [8] U. C. Paul, D. Fragouli, I. S. Bayer, E. Mele, C. Conchione, R. Cingolani, S. Moret, A. Athanassiou (2017) Mineral oil barrier sequential polymer treatment for recycled paper products in food packaging. Mater. Res. Express, https://doi.org/10.1088/2053- 1591/4/1/015501. [9] Sánchez González, C., Pérez Jiménez, A., Malvé, M., Díaz Jiménez, C. (2025). Effect of Annealing on the Mechanical Properties of Composites of PLA Mixed with Mg and with HA. Polymers, 17(9), 1207. https://doi.org/10.3390/polym17091207 [10] He, Y.; Xu, W.-H.; Zhang, H.; Qu, J.-P. (2020) Constructing Bone-Mimicking High- Performance Structured Poly(lactic acid) by an Elongational Flow Field and Facile Annealing Process. ACS Appl. Mater. Interfaces, 12, 13411–13420 [11] Bennett, C.; Sojithamporn, P.; Thanakulwattana, W.; Wattanutchariya, W.; Leksakul, K.; Nakkiew, W.; Jantanasakulwong, K.; Rachtanapun, P.; Suhr, J.; Sawangrat, C. (2022) Optimization of 3D Printing Technology for Fabrication of Dental Crown Prototype Using Plastic Powder and Zirconia Materials. Materials, 15, 8618 [12] Suresha, B.; Giraddi, V.V.; Anand, A.; Somashekar, H. (2022) Dynamic mechanical analysis of 3D printed carbon fiber reinforced polylactic acid composites. Mater. Today Proc., 59, 794–799. [13] Lan, W.; Wang, M.; Lv, Z.; Li, J.; Chen, F.; Liang, Z.; Huang, D.; Wei, X.; Chen, W. (2024) Carbon nanotubes-reinforced polylactic acid/hydroxyapatite porous scaffolds for bone tissue engineering. Front. Mater. Sci., 18, 240675.

Materials, Fabrication and Characterization of Poly (Lactic Acid) Composites

Abstract

Keywords

References

More Articles from WORLD JOURNAL OF INNOVATION AND MODERN TECHNOLOGY