References
[1] S. Tenbohlen, S. Coenen, M. Djamali, A. Müller, M. Samimi, and M. Siegel, "Diagnostic
Measurements for Power Transformers," Energies, vol. 9, p. 347, 2016.
[2] T. Piotrowski, P. Rozga, and R. Kozak, "Comparative analysis of the results of diagnostic
measurements with an internal inspection of oil-filled power transformers," Energies, vol.
12, p. 2155, 2019.
[3] M. Kunicki, A. Cichon, and S. Borucki, "Measurements on partial discharge in on-site
operating power transformer: A case study," IET Gener. Transm. Distrib., vol. 12, pp.
2487–2495, 2018.
[4] M. Florkowski, M. Kuniewski, and P. Zydro?, "Measurements and Analysis of Partial
Discharges at HVDC Voltage with AC Components," Energies, vol. 15, p. 2510, 2022.
[5] I. Fofana, "50 years of development of insulating liquids," IEEE Electr. Insul. Mag., vol. 29,
pp. 13–25, 2013.
[6] D.K. Mahanta and S. Laskar, "Electrical insulating liquid: A review," J. Adv. Dielectr., vol.
7, pp. 1730001-1–1730001-9, 2017.
[7] U.M. Rao, I. Fofana, T. Jaya, E.M. Rodriguez-Celis, J. Jalbert, and P. Picher, "Alternative
Dielectric Fluids for Transformer Insulation System: Progress, Challenges, and Future
Prospects," IEEE Access, vol. 7, pp. 184552–184571, 2019.
[8] P. Rozga, A. Beroual, P. Przybylek, M. Jaroszewski, and K. Strzelecki, "A review on
synthetic ester liquids for transformer applications," Energies, vol. 13, p. 6429, 2020.
[9] Z. Shen, F. Wang, Z. Wang, and J. Li, "A critical review of plant-based insulating fluids for
transformer: 30 years of development," Renew. Sustain. Energy Rev., vol. 41, p. 110783,
2021.
[10] S. Mahmud, G. Chen, I. Golosnoy, G. Wilson, and P. Jarman, "Experimental studies of
influence of DC and AC electric fields on bridging in contaminated transformer oil,"
IEEE Trans. Dielectr. Electr. Insul., vol. 22, pp. 152–160, 2015.
[11] P. Rozga, M. Stanek, and B. Pasternak, "Characteristics of Negative Streamer Development
in Ester Liquids and Mineral Oil in a Point-to-Sphere Electrode System with a Pressboard
Barrier," Energies, vol. 11, p. 1088, 2018.
[12] D. Martin and Z.D. Wang, "Statistical analysis of the AC breakdown voltages of ester based
transformer oils," IEEE Trans. Dielectr. Electr. Insul., vol. 15, pp. 1044–1050, 2008.
[13] V.-H. Dang, A. Beroual, and C. Perrier, "Comparative study of statistical breakdown in
mineral, synthetic and natural ester liquids under AC voltage," IEEE Trans. Dielectr.
Electr. Insul., vol. 19, pp. 1508–1513, 2012.
[14] A. Reffas, H. Moulai, and A. Béroual, "Comparison of dielectric properties of olive oil,
mineral oil, and other natural and synthetic ester liquids under AC and lightning impulse
stresses," IEEE Trans. Dielectr. Electr. Insul., vol. 25, pp. 1822–1830, 2018.
[15] Working Group A2.35, Experiences in Service with New Insulating Liquids, CIGRE
Brochure 436, Paris, France, 2011.
[16] X. Wang, Z. Wang, and J. Noakhes, "Motion of conductive particles and the effect on AC
breakdown strengths of esters," in Proc. 2011 IEEE Int. Conf. Dielectric Liquids,
Trondheim, Norway, 26–30 June 2011.
[17] A. Beroual, U. Khaled, P.S.M. Noah, and H. Sitorus, "Comparative Study of Breakdown
Voltage of Mineral, Synthetic and Natural Oils and Based Mineral Oil Mixtures under
AC and DC Voltages," Energies, vol. 10, p. 511, 2017.[18] J. Xiang, Q. Liu, and Z.D. Wang, "Streamer characteristic and breakdown in a mineral oil
and a synthetic ester liquid under DC voltage," IEEE Trans. Dielectr. Electr. Insul., vol.
25, pp. 1636–1643, 2018.
[19] Q. Liu and Z.D. Wang, "Breakdown and withstand strengths of ester transformer liquids in a
quasi-uniform field under impulse voltages," IEEE Trans. Dielectr. Electr. Insul., vol. 20,
pp. 571–579, 2013.
[20] P. Rozga, M. Stanek, and K. Rapp, "Lightning properties of selected insulating synthetic
esters and mineral oil in point-to-sphere electrode system," IEEE Trans. Dielectr. Electr.
Insul., vol. 25, pp. 1699–1705, 2018.
[21] IEC 60897:1987, Methods for the Determination of the Lightning Breakdown Voltage of
Insulating Liquids, International Electrotechnical Commission, Geneva, Switzerland,
1987.
[22] M.N. Ngoc, O. Lesaint, N. Bonifaci, A. Denat, and M. Hassanzadeh, "A comparison of
breakdown properties of natural and synthetic esters at high voltage," in Proc. 2010 Ann.
Rep. Conf. Electrical Insulation and Dielectic Phenomena, West Lafayette, IN, USA, 17–
20 October 2010.
[23] Q. Liu and Z.D. Wang, "Streamer characteristic and breakdown in synthetic and natural
ester transformer liquids under standard lightning impulse voltage," IEEE Trans. Dielectr.
Electr. Insul., vol. 18, pp. 285–294, 2011.
[24] G. Dombek, Z. Nadolny, P. Przybylek, R. Lopatkiewicz, A. Marcinkowska, L. Druzynski,
T. Boczar, and A. Tomczewski, "Effect of Moisture on the Thermal Conductivity of
Cellulose and Aramid Paper Impregnated with Various Dielectric Liquids," Energies, vol.
13, p. 4433, 2020.
[25] U.M. Rao, I. Fofana, P. Rozga, A. Beroual, J. Malde, R. Martin, F. Wang, E. Casserly, M.
Pompili, L. Calcara, et al., "Next Generation Insulating Liquids," in Proc. 2022 IEEE 21st
Int. Conf. Dielectric Liquids (ICDL), Sevilla, Spain, 29 May–2 June 2022, pp. 1–4.
[26] Mineral insulating oils in electrical equipment - Supervision and maintenance guidance,
IEC 60296:2018.
[27] E. Kuffel, W. S. Zaengl, and J. Kuffel, High Voltage Engineering: Fundamentals, 2nd ed.
Oxford, UK: Newnes, 2012.
[28] IEEE Recommended Practice for Measurement of Power Factor Tip-Up of Rotating
Machinery Stator Coil Insulation, IEEE Standard 286-2000, 2000.
[29] Electric strength of insulating materials - Test methods - Part 1: Tests at power
frequencies*, IEC 60243-1:2013.
