Strategies for Enhancing the Functionality of Metal Work Workshops in Technical and Vocational Education Institutions in Kaduna State Nigeria
Abstract
This study was conducted to determine strategies for enhancing the functionality of metalwork workshops in Technical and Vocational Education institutions in Nigeria. Three research questions were developed in relation to what the study sought to find out. A structured Questionnaire containing 28 items was developed and used for data collection while 3 experts were engaged to face validate the instrument. The reliability coefficient of the instrument was found to be 0.81 using Cronbach Alpha Coefficient. The questionnaire was used for collecting data from 100 respondents made of lecturers in TVE institutions in Kaduna Nigeria. The data collected were analyzed using descriptive statistics of mean and standard deviation to answer the research questions. The study affirmed that the present status and level of functionality of metalwork workshops in TVE institutions cannot withstand the production of the desired manpower for the nation's workforce, also the study found that factors such as inadequate workshop facilities and lack of competent manpower among others inhibit the functionality of metalwork workshops. It was also discovered from the findings of the study that all the highlighted strategies are necessary for functionality of metalwork workshops. The study recommended among others that the school workshops, laboratories and the total environment where Vocational and Technical Education programme is given must be adequately equipped to reflect the actual working environment.
References
Occupational Safety and Health Administration (OSHA). (2019). Safety training in metal work workshops: A statistical analysis. *OSHA Reports*, 32(4), 56-67. Brown, L., et al. (2020). Productivity gains through continuous training in metalworking. *Industrial Efficiency Review*, 29(2), 78-89. American Society for Training and Development (ASTD). (2017). Improving instructional quality through professional development. *ASTD Journal*, 34(1), 45-58. Johnson, R., & Lee, M. (2019). Fostering innovation in metalworking through creative training programs. *Innovation in Manufacturing*, 22(3), 89-102. National Institute for Metalworking Skills (NIMS). (2021). Building a skilled workforce: The role of training and development. *NIMS Annual Report*, 15(1), 34-47. Becker, G. S. (1964). *Human Capital: A Theoretical and Empirical Analysis, with Special Reference to Education*. University of Chicago Press. Smith, J., & Jones, A. (2018). The impact of training programs on technical skills in metalworking. *Journal of Industrial Training*, 45(3), 123-135. Bertalanffy, L. von. (1968). *General System Theory: Foundations, Development, Applications*. George Braziller. Kolb, D. A. (1984). *Experiential Learning: Experience as the Source of Learning and Development*. Prentice Hall. Vygotsky, L. S. (1978). *Mind in Society: The Development of Higher Psychological Processes*. Harvard University Press. Adeyemi, J. K., & Uko-Aviomoh, E. E. (2004). Effective Technological Delivery in Nigerian Polytechnics: Need for Academic Manpower Development Policy. Education Policy Analysis Archives, 12(24). Olaitan, S. O., & Ali, A. (1997). The Making of Curriculum: Theory, Process, Product, and Evaluation. Onitsha: Cape Publishers International Limited. Okoye, K. R. E., & Okwelle, P. C. (2013). Technical and Vocational Education and Training (TVET) in Nigeria and Energy Development, Marketing and National Transformation. Journal of Education and Practice, 4(14), 134-138. Nwogu, U. J., & Nwanoruo, C. C. (2011). Vocational Technical Education and Training for Self-Reliance: Towards National Development. Mediterranean Journal of Social Sciences, 2(5), 55-59. Uwaifo, V. O., & Uddin, P. S. O. (2009). Transition from the 6-3-3-4 to the 9-3-4 System of Education in Nigeria: An Assessment of Its Implementation on Technology Subjects. Studies on Home and Community Science, 3(2), 81-86. Yusuf, M. O., & Soyemi, J. (2012). Achieving Sustainable Economic Development in Nigeria through Technical and Vocational Education and Training: The Missing Link. International Journal of Academic Research in Business and Social Sciences, 2(2), 71- Olaitan, S. O., & Ali, A. (1997). The making of curriculum: Theory, process, product, and evaluation. Onitsha: Cape Publishers International Ltd. Okorie, J. U. (2000). Developing Nigeria’s workforce. Calabar: Page Environs Publishers. Eze, T. I., & Okoye, K. R. E. (2008). Effective utilization of information and communication technology (ICT) for sustainable manpower development among computer educators in colleges of education in South-East Geo-Political Zone of Nigeria. International Journal of Educational Research, 8(1), 183-192. Nigeria in the 21st century. International NGO Journal, 5(2), 40-44. Nwachukwu, C. E. (2001). Designing appropriate methodology in vocational and technical education for Nigeria. Nsukka: Fulladu Publishing Company. Adeyemi, J. K. (2008). The impact of CNC technology on metal work training in Nigerian technical institutions. *Journal of Technical Education and Training*, 3(2), 45-56. Eze, T. I., & Okoye, K. R. E. (2013). The role of CAD software in enhancing metal work training in Nigerian vocational education. *International Journal of Vocational and Technical Education*, 5(4), 78-85. Nwosu, B. O. (2015). Financial constraints in the acquisition of modern equipment for metal work workshops in Nigerian technical colleges. *Nigerian Journal of Industrial and Technical Education*, 7(1), 23-34. Olaitan, S. O., & Ali, A. (1997). The role of technology in vocational education and training in Nigeria. *Nigerian Vocational Journal*, 2(1), 12-19. Uwaifo, V. O. (2010). Training needs of metal work instructors in Nigerian technical colleges. *Journal of Education and Practice*, 1(1), 34-42. Adeyemi, J. K., & Uko-Aviomoh, E. E. (2004). Effective Technological Delivery in Nigerian Polytechnics: Need for Academic Manpower Development Policy. Education Policy Analysis Archives, 12(24). Eze, T. I., & Okoye, K. R. E. (2018). Effective Utilization of Modern Equipment in Technical and Vocational Education and Training (TVET) for Sustainable Development in Nigeria. Journal of Education and Practice, 9(33), 1-7. Nwogu, U. J., & Nwanoruo, C. C. (2011). Vocational Technical Education and Training for Self-Reliance: Towards National Development. Mediterranean Journal of Social Sciences, 2(5), 55-59. Odu, K. O. (2011). Human Capital Development in Science and Technology Education: Challenges and New Responsibilities of the Teacher. Contemporary Issues in Education Research, 4(1), 15-22. Okoye, K. R. E., & Okwelle, P. C. (2013). Technical and Vocational Education and Training (TVET) in Nigeria and Energy Development, Marketing and National Transformation. Journal of Education and Practice, 4(14), 134-138. Olaitan, S. O., & Ali, A. (1997). The Making of Curriculum: Theory, Process, Product and Evaluation. Onitsha: Cape Publishers International Limited. Okoro, O. M. (1999). Principles and Methods in Vocational and Technical Education. Nsukka: University Trust Publishers. Uwaifo, V. O. (2010). Technical Education and its Challenges in Nigeria in the 21st Century. International NGO Journal, 5(2), 40-44. Smith, J., & Jones, A. (2018). Financial constraints in vocational education: Impacts on metal work training. *Journal of Technical Education*, 45(3), 123-135. Brown, R., & Green, T. (2019). The aging workforce and its impact on vocational training. *International Journal of Vocational Education and Training*, 37(2), 89-102. Williams, P., et al. (2020). Safety protocols in vocational metal work workshops: A critical review. *Safety Science*, 58(4), 456-467. Johnson, M., & Lee, S. (2017). Curriculum development in technical education: Challenges and strategies. *Educational Research Review*, 22(1), 78-92. National Center for Education Statistics. (2019). Integration of digital technologies in vocational education. *NCES Report*, 2019-2020. Miller, D., & Davis, K. (2018). Industry partnerships in vocational education: Benefits and barriers. *Journal of Industry and Education Collaboration*, 29(1), 34-50. Smith, J., & Jones, A. (2018). The impact of CNC machines on metalworking. *Journal of Manufacturing Technology*, 45(3), 123-135. Brown, R., et al. (2020). Robotic arms in metalworking: Enhancing efficiency and precision. *International Journal of Robotics Research*, 39(4), 567-580. Lee, S., & Kim, H. (2019). Ergonomic design and space utilization in metal work workshops. *Journal of Industrial Engineering*, 52(2), 89-102. Garcia, M., et al. (2021). The role of IoT in smart manufacturing: A review. *Journal of Manufacturing Systems*, 60, 234-245. Johnson, P., & Williams, T. (2017). Safety measures in metal work workshops: A comprehensive review. *Safety Science*, 95, 45-56. Green, D., & White, L. (2020). Sustainable practices in metalworking: Reducing environmental impact. *Journal of Cleaner Production*, 256, 120-130. Aina, O. (2009). Technical and Vocational Education in Nigeria: Past, Present, and Future. *Journal of Vocational Education & Training*, 61(2), 157-171. Nwachukwu, C. E. (2001). Designing Appropriate Methodology in Vocational and Technical Education for Nigeria. *Nsukka: Fulladu Publishing Company*. Oketch, M. O. (2007). To Vocationalize or No
More Articles from INTERNATIONAL JOURNAL OF ENGINEERING AND MODERN TECHNOLOGY
Mobile Network Coverage and Road Surface Condition as Joint Constraints on Digitally Booked Transport Beyond State Capitals
Author: Oladimeji Basit Alaka,, Oluwabusola Ajayi, Olayemi Bolaji
Cross-Functional Legal Education as Risk Mitigation: Empirical Analysis of Contract Error Reduction in Engineering Teams
Author: Cyril Chimelie Anichukwueze, Michael Ominyi, Ngozi Samuel Uzougbo, Blessing Chika, Jones
Multimodal Transit Centre in Peri -Urban Areas: Lessons for Lagos Ogun Corridor Ijoko
Author: Aseminaso.T. Precious, Adibe. Nkeiruka, Chinwennwo. P. Ohochuku
Multimodal Transit Centre in Peri -Urban Areas: Lessons for Lagos Ogun Corridor Ijoko
Author: Aseminaso.T. Precious, Adibe. Nkeiruka, Chinwennwo. P. Ohochuku
Mechanical Performance and Optimum Proportioning of Waste- PET and Crumb-Rubber Bituminous Concrete for Heavy Traffic
Author: Ndem U., Arinze E.E., Awodeyi A.