References
[1] Hansen, M.E. and Dursteler, E. “Pipeline, rail & trucks: Economic, environmental, and safety impacts of transporting oil and gas in the U.S, Strata” 2017, 1–6. [2] C.F. Mason, A comparison of the risk of transporting crude oil: Rail vs. pipeline, IAEE Energy Forum. (2018) 5–7. [3] Vervynckt, S. Verbeken, K., Lopez, B. and Jonas, J.J, “Modern HSLA steels and role of non-recrystallisation temperature,” International Materials Reviews. 57, 2012, 187– 207. [4] Baker, T.N. “Microalloyed steels, Ironmaking and Steelmaking” 43, 2016, 264–307. [5] P C Sharma, A text book of Production Technology, S Chand and company2004 [6] Haider, S. F., Quazi, M. M., Bhatti, J., Nasir Bashir, M., & Ali, I. (2019). Effect of Shielded Metal Arc Welding (SMAW) parameters on mechanical properties of low- carbon, mild, and stainless-steel welded joints: A review. *Journal of Advances in Technology and Engineering Research, 5(5). https://doi.org/10.20474/jater-5.5.1 [7] Vijayesh Rathi, Hunny ‘Analyzing the effect of parameters on SMAW processes. International journal of emerging research in management and technology. ISSN: 2278- 9359, Volume 4, Issue 6, June 2015 [8] Prakash M, Robert Henry. ‘An experimental investigation of weld defects in shielded metal arc welding’. International journal of research in engineering, science and technologies ISSN:2454-5392, Volume 1, Issue 8, April 2016. [9] Gurpreet Singh Sidhu, Sukhpal Singh Chatha ‘Role of shielded metal arc welding consumables on pipe weld joint’ International Journal of Emerging technology and Advanced Engineering , Volume 2, Issue 12, 2012. [10] S. Murugan, P. V. Kumar, B. Raj, M. S. C. Bose. ‘Temperature distribution during multi- pass welding of plates’. International journal of pressure vessels and piping, Volume 75, Issue 12, October 1998, Pages 891-905 [11] M. A. Gaodi and D. Sangotra, ``A review paper on effect of varying welding heat inputs on microstructure, mechanical properties and corrosion behaviours of ferritic stainless steel & mild steel,'' International Journal of Modelling Engi- neering Resolution, vol. 4, no. 1, pp. 105-109, 2014. [12] R. Jha and A. Jha, ``Inluence of welding current and joint design on the tensile properties of SMAW welded mild steel joints,'' International Journal of Engineering Research and Applications, vol. 4, no. 6, pp. 106-111, 2014. [13] Thornton, C. E., and Webster, D. J. (1990). Progress in the use of metal powder additions for the welding of offshore structures. In Proceeding of the Ninth International Conference on offshore mechanics and arctic Engineering. 3, 399-408). [14] Callister, W.D and John Wiley & Sons, (2014), Materials Science and Engineering, An Introduction, 9th Edition, [15] Devendrnath K. R. and Suresh K.S, (2019) Department of metallurgical and materials Engineering, Ntional institute of Technology, warngal, India. [16] Askeland, D. R. (1996) The Science and Engineering of materials, 3rd Edition, Chapman & Hall, pp. 352-400. [17] Connor, L. P. (1991) Welding Handbook-welding processes, Vol. 2, 8'h Ed, American welding Society. [18] Hrivak, I. (1992) Theory of weldability of metals and alloys, Materials Science Monographs 74, Elsevier. [19] Devendrnath, K. R. (2017) Department of metallurgical and materials Engineering, Ntional institute of Technology, warngal, India. [20] M. A. Gaodi and D. Sangotra, ``A review paper on effect of varying welding heat inputs on microstructure, mechanical properties and corrosion behaviours of ferritic stainless steel & mild steel,'' International Journal of Modelling Engi- neering Resolution, vol. 4, no. 1, pp. 105-109, 2014. [21] Abson, D. J., and Pargeter, R. J. “Factors influencing as-deposited strength, microstructure, and toughness of manual metal arc welds suitable for C-Mn steel fabrications”, International Metals Reviews, 31(1), 1986,141-196. [22] Abson, D. J., Dolby, R. E., and Hart, P. H. M. “The role of non-metallic inclusions in ferrite nucleation in carbon steel weld metals”, Trends in Steel and Consumables for Welding, 1, 1978, 75-101. [23] Agilan, M., Venkateswaran, T., Sivakumar, D. and Pant, B. “Effect of heat input on microstructure and mechanical properties of inconel-718 EB Welds”, Procedia Materials Science, 5, 2014, 656-662. [24] Dutta, J., and Narendranath, S. “Estimation of cooling rate and its effect on temperature dependent properties in welded high carbon steel joints”, 2014. [25] Grong, O. and Matlock, D. K. “Microstructural development in mild and low-alloy steel weld metals”, International Metals Reviews, 31(1), 1986, 27-48. [26] Lee, C. S., Chandel, R. S., and Seow, H. P. “Effect of welding parameters on the size of heat affected zone of submerged arc welding”, Materials and Manufacturing Processes, 15(5), 2000, 649-666. [27] Beachem, C.D. “A new model for hydrogen-assisted cracking (hydrogen “embrittlement”)”, Metallurgical Transactions. 3, 1972, 441–455. [28] Chattoraj, I. “The effect of hydrogen induced cracking on the integrity of steel components”, Sadhana, 20, 1995, 199–211. [29] Dong, C. F., Liu, Z. Y., Li, X. G., and Cheng, Y. F. “Effects of hydrogen-charging on the susceptibility of X100 pipeline steel to hydrogen-induced cracking”, International journal of hydrogen energy, 34(24), 2009, 9879-9884 [30] Dong, C.F. Xiao, K. Liu, Z.Y. Yang, W.J. Li, X.G. “Hydrogen induced cracking of X80 pipeline steel”, International Journal of Minerals, Metallurgy and Material, 17, 2010, 579–586.
