Submit your papersSubmit Now
For Enquiries: [email protected]
IIARD LogoIIARD

Evaluation of Earthing Protection System of Substations: A Case Study of Federal Polytechnic Ile-Oluji, Ondo State

Olamiposi Ibukun DareAdeniran, Samuel Ibikunle Osafehinti, Adewole Oyewale, Adetunmbi

Abstract

This research evaluates the earthing protection systems across various electrical substation networks within Federal Polytechnic, Ile-Oluji, Ondo State, Nigeria. The assessment focused on measuring ground resistance values to determine the performance and reliability of earthing systems critical for equipment protection and personnel safety using earth resistance tester. Findings revealed that the Hostel Building, Engineering Substation, and Mega Substation (serving transformers and feeders) demonstrated low resistance values, indicating efficient earthing performance. Conversely, the Administrative Building exhibited significantly high resistance, suggesting issues such as poor soil conductivity and inadequate grounding design. Additionally, lightning arresters across substations consistently showed elevated resistance levels, likely due to isolated grounding configurations for surge protection. Recommendations include enhancing the Administrative Building’s earthing system through the addition of grounding rods, soil treatment, or complete redesign, inspecting lightning arrester grounds in the School of Agriculture and Mega Substations for improvements, and implementing routine testing and maintenance to ensure long- term system effectiveness. This evaluation underscores the importance of continuous monitoring and upgrades to maintain optimal grounding conditions in substation networks.

Keywords

Electrical Substation NetworksEarthing Resistance TesterHigh ResistanceLow Resistance and Surge Protection.

References

1. Ibrahim, A. O., & Jamil, M. (2023). *Recent Advances in Grounding Systems for Electrical Power Substations: A Review*. IEEE Access, 11, 54732-54744. https://doi.org/10.1109/ACCESS.2023.3162998 Kumar, M., & Singh, A. (2022). *Design and Evaluation of Substation Earthing Systems: A Comprehensive Review*. Energy Reports, 8, 265-278. https://doi.org/10.1016/j.egyr.2022.10.042. Bhardwaj, R., & Gupta, A. (2021). *Analysis and Improvement of Earthing System Performance in High-Voltage Substations*. Electrical Engineering Journal, 64(3), 125- https://doi.org/10.1007/s00202-021-01199-9. Chatterjee, S., & Jain, A. (2023). *Smart Monitoring of Substation Earthing Systems Using IoT and Machine Learning Techniques*. International Journal of Electrical Power & Energy Systems, 124, 105254. https://doi.org/10.1016/j.ijepes.2020.105254. Ghosh, A., & Kaur, G. (2024). *Impact of Soil Resistivity on the Performance of Substation Earthing Systems*. Journal of Electrical Engineering and Technology, 19(2), 653-660. https://doi.org/10.1007/s42835-024-01659-7 Chen, M., & Zhang, Y. (2024). Grounding grids corrosion evaluation of electrified railway based on two-stage optimization algorithm. IEEJ Transactions on Electrical and Electronic Engineering. https://doi.org/10.1002/tee.24219 Ali, A., Reffin, J., & Oettle, N. (2023). Review: Factors affecting the performance of ground electrodes under high impulse conditions. Energies, 16(10), https://doi.org/10.3390/en16104236 Rahman, M. A., Chuan, S. B., Fong, P. W., Alkharabsheh, O. H. M., & Sozon, M. (2024). Factors influencing academic dishonesty among undergraduate students in higher education institutions (HEIs) in Malaysia. Journal of Management Info, 11(2), 137–159. https://doi.org/10.31580/jmi.v11i2.3039 Omorogiuwa, O., Oboh, E., (2018): *Evaluation of earthing system of distribution substation in Ekpoma Nigeria*. Journal of Electrical and Telecommunication Engineering, a peer review of Advances in Electrical and Telecommunication Engineering 1 pp. 31-37. 10.Gomes, C. and Abkadir, M.Z.A., (2014): *Industrial Wastes and Natural Substances for Improving Electrical Earthing Systems*. International Journal of Electrical Engineering, 21(2) 39-47. Amadi, H.N., (2015): *Effective earthing system in the corrosive soil of Niger Delta*International Journal of Emerging Science and Engineering (IJESE), 3(6), 5-9. Fluke Corporation. (2016). Ground resistance testing guide. Fluke Corporation. EEE. (2012). IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Ground System (IEEE Std 81-2012). Megger. (2010). A Guide to Earth Resistance Testing. AEMC Instruments. (2013). Understanding and Measuring Ground Resistance. ASTM International. (2006). Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method (ASTM G57-06).

More Articles from INTERNATIONAL JOURNAL OF ENGINEERING AND MODERN TECHNOLOGY