Moisture Effect on the Strength Properties of Patani-Clay Modified Asphalt Concrete

Omar, H.A., Yosoff, N.I.M., Mubaraki, M & Ceylan, H. (2020). Effect of Moisture Damage on Asphalt Mixtures. Journal of Traffic and Transportation Engineering. 7(5): 600-628. Doi: 10.1016/j.jtte.2020.07.001. Sun, L., Xin, X. & Ren, J. (2017). Asphalt Modification using Nano Materials and Polymers Composite Considering High and Low Temperature Performance. Constr. Build. Mater. 133: 358-366. https://doi.org/10.1016/j.conbuidmat,2016.12.073. Ozen, H. (2011). Rutting Evaluation of Hydrated Lime & SBS Modified Asphalt Mixtures for Laboratory and Field Compacted Samples. Constr. Build. Mater. 25(2): 756-765. https://doi.org/10.1016/j.conbuildmat.2010.07.010. Abuawad, Ibrahim M.A., Imad L. Al-Qadi, and James S. Trepanier (2015). “Mitigation of Moisture Damage in Asphalt Concrete: Testing Techniques and Additives/modifiers Effectiveness.” Construction and Building Materials 84: 437–443. doi: 10.1016/j.conbuildmat.2015.03.001. Ismael, Mohammed Qadir, and Hiba M. Al-Taher (2015). "Reinforcement of Asphalt Concrete by Polyester Fibers to Improve Flexural Bending Fatigue Resistance." Journal of Engineering 21, no. 1: 115-130. Ashish, Prabin Kumar, Dharamveer Singh, and Siva Bohm (2016). “Investigation on Influence of Nanoclay Addition on Rheological Performance of Asphalt Binder.” Road Materials and Pavement Design 18, no. 5: 1007–1026. doi:10.1080/14680629.2016.1201522. Ismael, Mohammed Qadir, and Ahmed Hussein Ahmed (2019). "Effect of Hydrated Lime on Moisture Susceptibility of Asphalt Mixtures." Journal of Engineering 25, no. 3: 89-101. Das, Prabir Kumar, Hassan Baaj, Niki Kringos, and Susan Tighe (2015). “Coupling of Oxidative Ageing and Moisture Damage in Asphalt Mixtures.” Road Materials and Pavement Design 16, no. sup1: 265–279. doi:10.1080/14680629.2015.1030835. Otto, C.G & Amadi, C.P. 2020. Laboratory Investigation of the Effect of Traffic Load Frequency and Moisture on the Fatigue Life of Asphalt Concrete Pavement. International Journal of Trend in Research & Development, Vol. 7(4), ISSN: 2394-9333. www.ijtrd.com. Otto, C.G & Awarri, A.W. 2021. Comparative Cost-Effectiveness of Modified Asphalt Concrete Submerged in Moisture as Related to Fatigue Performance. IOSR Journal of Mechanical and Civil Engineering 18 (2): 49-54. Doi:10.9790/1684-1802014954. Mohd Satar, M. K. I., Jaya, R. P., Rafsanjani, M. H., Che’ Mat, N., Hainin, M. R., Aziz, Md. M A., Abdullah, M. E & Jayanti, D. S. (2018). Performance of Kaolin Clay on Hot-mix Asphalt Properties. Journal of Physics: Conference Series, 10490, 012002 – doi:10.1088/1742-6596/1049/1/012002. Muniandy, R., Yunus, R., Salihudin, H & Aburkaba, E.E. (2013). Lamya Influence of Clay Nanoparticles on the Physical and Rheological Characteristics of Short Term Aged Asphalt Binder. Australian Journal of Basic and Applied Science 7(11): 488-498. Das, S., Biswas, S. S., & Giri, A. (2020). An Approach Towards Eco-friendly Modification of Bituminous Binder and Pavement Performance Enhancement using Waste Plastics and Mineral Additives. Construction and Building Materials, 251, https://doi.org/10.1016/j.conbuildmat.2020.118958. Ahmad, M.F., Hafeez, I. and Farhan, (2022). Moisture Susceptibility of Organophilic Nano Clay Modified Asphalt Mixtures. SSRG International Journal of civil Engineering. Volume 9, Issue 9. ISSN: 2348 – 8352. Baker, M. I. B., Abendeh, R. M, & Obaidat, T. A. (2018). Employing Natural Bentonite Clay as Partial Replacement of Mineral Filler in Asphalt Mixtures. DOI:10.1061/(ASCE)MT.1943-5533.002375. 2018 American Society of Civil Engineers. Tarefder, R. A., & Ahmed, Z. (2014). Characterization of Conventional and Clay-modified Hot Mix Asphalt Mixtures. Construction and Building Materials, 52, 35-39. Mandal, A. K., Patra, R. K. & Garg, N. (2023). Enhancement in Strength and Durability Characteristics of Asphalt Mix Incorporating Calcined Clay. Case Studies in Construction Materials, 16, e01308. https://doi.org/10.1016/j.cscm.2022.e01308. AASHTO T 340-10 (2018). Standard Method of Test for Determining Rutting Susceptibility of Hot Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA). ASTM C595/C595M-21. Standard Specification for Blended Hydraulic Cements. ASTM D4318-17e1. Standard Test Methods for Liquid Limit, Plastic Limit and Plasticity Index of Soils. ASTM D1559-89. Test Method for Resistance of Plastic Flow of Bituminous Mixtures using Marshall Apparatus. ASTM 1989. ASTM D2726-21. Standard Test Method for Bulk Specific Gravity and Density of Non- Absorptive Compacted Asphalt Mixtures. ASTM 2011. ASTM D 3515-01. Standard Specification for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures (Withdrawn 2009). ASTM D-1559-89. Test Method for Resistance of Plastic Flow of Bituminous Mixtures Using Marshall Apparatus. https://www.astm.org/d1559-89.html. NGS 1997. Nigeria General Specifications for Roads and Bridges, Volume II, Revised 1997 https://www.pdfcoffee.com. AASHTO T 27-14. Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates. Lakshminarayanan, L. A., Sabaraya, N., Arumairaj, R. J., & Saravanan, V. (2016). Effect of Clay Content on the Properties of Bituminous Mix. International Research Journal of Engineering and Technology, 3(2), 1205-1209. Cabral, A. R., Pereira, P. A. A. & Azevedo, A. C. V. M. (2013). Influence of Mineral Fillers on Rheological and Fatigue Behaviour of Asphalt Binders. Construction and Building Materials, 47, pp.1416-1425. https://doi.org/10.1016/j.conbuildmat.2013.06.065. Awotunde, F. M., Soboyejo, A. B., Oguntayo, D. O., Akinkurolere, O. O. & Orogbade, B. O. (2022). Effects of Calcined Clay, Sawdust Ash and Chemical Admixtures on Strength and Properties of Concrete for Pavement and Flooring Applications using Taguchi Approach. Case Studies in Construction Materials, 15, e00568. https://doi.org/10.1016/j.cscm.2021.e00568. Pandit, S. R., & Patel, K. A. (2021). Valorization of Waste Plastics in Asphalt Concrete: A Sustainable Approach. Journal of Sustainable Cement-Based Materials, 10(1), 1-21. https://doi.org/10.1080/21650373.2020.1757546. Sahoo, P. K. & Rout, S. K. (2020). Effect of Calcined Clay on Moisture Sensitivity and Strength Characteristics of Asphalt Mix. Materials Today: Proceedings, 27, pp.2351-2355. https://doi.org/10.1016/j.matpr.2020.03.317. Iloeje, U., Ogwe, D.O. & Asiaba, H.U. (2019). Modification of Quarry Dust and Bitumen Mixture using Kaolinite and Plastic Waste. Advances in Civil Engineering, 2019, article 4656792. https://doi.org/10.1155/2019/4656792. Shen, S., Li, H., Zhang, W. & Xue, Y. (2018). Effect of Waste Plastic Fiber on the Engineering Properties of Asphalt Mixture. Materials, 11(5), https://doi.org/10.3390/ma11050802.