References
Cai, L., Zhang, Y., & Huang, X. (2020). Analysis of Two-Stage Nozzle Flapper Electrohydraulic Servo Valve Dynamics. Journal of Fluid Power Systems, 30(1), 15-28. Davis, M., & Brown, A. (2023). Performance Characteristics of Two-Stage Nozzle Flapper Valves in Aerospace Applications. Aerospace Science and Technology, 105, 105891. Huang, X., & Zhang, Y. (2021). Design Optimization of Two-Stage Electrohydraulic Servo Valves for Precision Control. Journal of Mechanical Engineering, 67(4), 213-225. Kumar, R., & Patel, S. (2023). High Gain and Stability in Two-Stage Nozzle Flapper Electrohydraulic Valves. Control Engineering Practice, 137, 105675. Lee, J., Park, H., & Kim, S. (2019). The Role of Flapper Mechanisms in Electrohydraulic Control Systems. International Journal of Hydraulics, 44(2), 99-112. Lopez, R., & Martinez, A. (2021). Robotic Applications of Two-Stage Nozzle Flapper Valves: Performance Insights. Robotics and Automation Magazine, 28(3), 78-88. Singh, A., & Gupta, P. (2022). Precision and Linearity in Electrohydraulic Servo Valve Design. Journal of Applied Mechanics, 89(3), 342-356. Tran, D., Nguyen, H., & Pham, T. (2023). Smart Control Systems in Electrohydraulic Applications: Enhancements and Innovations. Journal of Fluid Power Technology, 56(2), 134-145. Wang, L., Chen, Y., & Zhao, M. (2022). Advancements in Two-Stage Nozzle Flapper Valve Technology for Automated Systems. International Journal of Automation and Control, 19(1), 23-39. Williams, K., & Johnson, M. (2022). Aerospace Applications of Two-Stage Electrohydraulic Servo Valves. Journal of Aerospace Engineering, 40(1), 30-45. Zhao, L., Wu, J., & Li, F. (2023). Recent Trends in Hydraulic Servo Valve Technology for Manufacturing. Journal of Manufacturing Systems, 63, 85-97. G. Qiao, G. Liu, Z. Shi, et al., “A review of electromechanical actuators for more/all electric aircraft systems,” Journal of Mechanical Engineering Science, Vol. 232, Part C, 2018. Garg et al. Application of fiber optics in aircraft control system & its development. 2014 International Conference on Electronics and Communication Systems (ICECS). J. Li, Z. Yu, Y. Huang, and Z. Li, “A review of electromechanical actuation system for more electric aircraft,” IEEE/CSAA International Conference on Aircraft Utility Systems (AUS), Beijing, China, Oct. 2016. doi: 10.1109/AUS.2016.7748100. J.-C. Maré and M. Budinger, “Comparative analysis of energy losses in servo-hydraulic, electro- hydrostatic and electro-mechanical actuators,” 11th Scandinavian International Conference on Fluid Power, 2009. J.-C. Maré, “Review and analysis of the reasons delaying the entry into service of power-by-wire actuators for high-power safety-critical applications,” Actuators, vol. 10, no. 9, 2021, issn: 2076-0825. doi: 10.3390/ act10090233. J.-C. Maré, Aerospace Actuators 2. St George’s Road, London: ISTE, 2017. J.-C. Maré, Aerospace Actuators 3. St George’s Road, London: ISTE, 2018. Joshi, A. and Jayan, P.G., Modelling and Simulation of Aircraft Hydraulic System, AIAA Paper No. AIAA-2002-4611, Proc. of Modelling and Simulation Technologies Conference, Monterey, CA, USA, 6-8 August 2002. Randall T. Anderson Mathematical Modeling of a Two Spool Flow Control Servovalve Using a Pressure Control Pilot, ASME journal, volume 124, September 2004. Lee et al. Achieving High-Performance Electrified Actuation System with Integrated Motor Drive and Wide Bandgap Power Electronics. M. Bildstein, “A built-in jam release device for electromechanical actuators in flight control,” Proceedings of the 6th International Conference on Recent Advances in Aerospace Actuation Systems and Components, Toulouse, France, pp. 105–108, 2–3 April, 2014. Meredith PT. Viscious phenomena affecting High-lift systerms and suggestions for future CFD development. AGARD conference proceedings 515, 1993. Panagiotis, detailed model of an electro hydraulic servo system International journal of fluid power, volume 5, number 2, September 2004, pp 121-138. Qiao et al. A review of electromechanical actuators for More/All Electric aircraft systems. Qiao et al. Friction Torque Modelling and Efficiency Analysis of the Preloaded Inverted Planetary Roller Screw Mechanism. Randall T. Anderson Mathematical Modeling of a Two Spool Flow Control Servovalve Using a Pressure Control Pilot, ASME journal, volume 124, September 2004. Rudolph PKC. Mechanical design of high lift systems for high aspect ratio swept wings. Washington, D.C.: NASA?1998. Report No.: NASA/CR-1998-196709. Rudolph, P.K.C.: ‘High-Lift Systems on Commercial Subsonic Airliners’. NASA Contractor Report 4746, September 1996 S. Frischemeier, “Electrohydrostatic actuators for aircraft primary flight control-types, modelling and evaluation,” Proceedings of the Fifth Scandinavian . . ., pp. 1–16, 1997. doi: 10.15480/882.236. Smith AMO. High-lift aerodynamics. J Aircraft 1975;12 (6):501–30. Y. Hussain, S. Burrow, L. Henson, and P. Keogh, “A review of techniques to mitigate jamming in electromechanical actuators for safety critical applications,” International Journal of Prognostics and Health Management, vol. 9, no. 12, 2018, issn: 2153-2648, 2018 012. Recksiek, M.:(2009), ‘Advances high lift system architecture with distributed electric flap actuation’. – (AST), Hamburg, Germany Hardwick, G., Hanna, S., Panella, I.: ‘Functional modelling of high lift systems’. NAFEMS World Congress, 2017s
