Optimization of Blast Design Parameters for Improved Loading- Haulage Performance at CGC Quarry, Itakpe, Kogi State, Nigeria

Adebayo; B.; Thomas; A.

doi:10.56201/ijemt.vol.11.no1.2025.pg108.122

📄 Download Paper

Optimization of Blast Design Parameters for Improved Loading- Haulage Performance at CGC Quarry, Itakpe, Kogi State, Nigeria

Adebayo, B. and Thomas, A.

Abstract

The first phase of production cycle in quarrying operation is rock breaking by drilling and blasting. At CGC quarry, Itakpe in Kogi State, this study was carried out to understanding the existing method of fragmentation and the impacts on the loading and hauling performance. The conventional method of blasting which is trial and error has not been able to give a consistent result of 90% passing which is about 1000mm in diameter, this challenge was well analyzed and this research deployed O-Pitblast software solution to solve this challenge. Mechanical properties of the granite rock like density, uniaxial compressive strength, porosity, point-load and tensile strength were carried out. The properties serves to guide the choice of the blast parameters for the design of the blasting operations. The fragmentation that results from the series of blasts were analyzed to determine their uniformity which was at its best after the application of O-Pitblast solution. These uniform fragmentation that ranges from 650- 950mm passing were obtained which invariably enhanced efficient blasted rock movement, trucking capacity and reduced unnecessary idling.

Keywords

BlastingoptimizationfragmentationloadinghaulageO-pitblast.

References

Bhadawdekar R.M., Tonnizan M.E., Singh T.N., Pathak P. and Armaghani D.J. (2021): Rock Mass Classification for the Assessment of Blastability index in Tropically weathered Limestone. In X-N. Bui, C. Leci; Proceeding of the International Conference of Innovation for Sustainable Responsible Mining, Springer International Publishing. (pp. 13-14). Goswami, T., Martin, E., Rothery, M., Genge, D. (2015): A Holistic Approach to Managing Blast Outcomes. In: Proceedings of the 11th International Symposium Mehmmet, S., Ebrahim G., and Mohammed, A. (2013): Stochastic Approach for Evaluation of Back-Break due to Blasting Operations in Open Pit Mines. Rock Mechanics Engineering, 2020, 9490807. Munir T., Rahman Z.A., Saad R., Yilmaz N. and Ozturk H. (2019). Influence of Rock Mass Structure on Fragmentation using Discrete Element Method. Minerals, 9(4), 230. Nday I.N.M. and Thomas, H. (2019): Optimization of the Cycle Time to increase Productivity at Ruashi Mining. The South Africa Institute of Mining and Metallurgy. Pyra, J., and Gadek, K. (2020). Possible ways of Optimizing Blast Operations using O-Pitblast Software. Materialy Wysokonergrtczne/High Energy Materials, vol. 12(2), pp. 124-138. Sayadi A., Mojezi M., Talebi N., and Khandelwal M.A. (2020). Comparative study on the Application of various Artificial Neural Networks to Simultaneous Prediction of Rock Fragmentation and Backbreak, Journal of Rock Mechanics and Geotechnical Engineering, Vol. 5(4), pp. 18-24.

Optimization of Blast Design Parameters for Improved Loading- Haulage Performance at CGC Quarry, Itakpe, Kogi State, Nigeria

Abstract

Keywords

References

More Articles from INTERNATIONAL JOURNAL OF ENGINEERING AND MODERN TECHNOLOGY