Self-Priming Centrifugal Chemical Pumps: A Review

[1] Multiphase-corp.com (2022). Types of pumps and their working principles. Retrieved December 12, 2024. https://multiphase-corp.com/articles/types-of-pumps-and-their- working-principles/ [2] Kanute, J. (2004). Self?priming centrifugal pumps: a primer. World Pumps, 456(2004), 30–32. doi:10.1016/s0262-1762(04)00334-7, 10.1016/S0262-1762(04)00334-7 [3] Michael-Smith-Engineers-Ltd. (2022). Useful information on centrifugal pumps. Retrieved December 12, 2022. https://www.michael-smith-engineers. co.uk /resources/useful-info/centrifugal-pumps [4] [email protected] (2022) Operating principles of centrifugal pumps. Retrieved December 17, 2022. https://allpumps.com.au/pumps-by-type/self-priming-pumps/ [5] Rotechpumps.com (2023). A comprehensive guide to self-priming pumps: working, types, and uses. Retrieved October 9, 2024. https://www.rotechpumps.com/what-is-self-priming- pump/ [6] DXP Pacific (2020). Pros and cons of self-priming centrifugal pumps. Retrieved https://dxppacific.com/the-pros-and-cons-of-self-priming-centrifugal-pumps/ [7] Yao, H. Y., Zhang, Y. D., Wu, D. Z., & Wu, P. (2018). Numerical study on hydraulic and self- priming performance of a double-stage self-priming pump. IOP Conference Series: Earth and Environmental Science, 163(2018), 012039. doi:10.1088/1755-1315/163/1/012039 [8] Whatispiping.com (2023). What is a self-priming pump? Retrieved September 10, 2023. What is Pump Priming and Why it is Required? | Self-Priming Pumps – What Is Piping [9] Qian, H., Wu, D., Xiang, C., Jiang, J., Zhu, Z., Zhou, P., & Mou, J. (2022). A visualized experimental study on the influence of reflux hole on the double blades self-priming pump performance. Energies. 15(13), 4617. https://doi.org/10.3390/en15134617 [10] Wang, K., Zhang, Z., Jiang, L., Liu, H., & Li, Y. (2017). Effects of impeller trim on performance of two-stage self-priming centrifugal pump. Advances in Mechanical Engineering. 9(2), 1-11. https://doi.org/10.1177/1687814017692493 [11] Qian, H., Mou, J., Ren, Y., Zhu, Z., Liu, N., Zheng, S., & Wu, D. (2019). Investigation of self- priming process of a centrifugal pump with double blades. Journal of Thermal Science. 30(3), 849-858. doi.org/10.1007/s11630-020-1370-7 [12] Linn, S. (2022). Operating principle of centrifugal pump and its applications. Journal of Applied Mechanical Engineering. 11(6), 1000424 https://doi.org/10.35248/2168 9873.22.11.424. [13] Towoju, O. A., Oluwatoyin, O., Benedict, A., Omonigho, I., & Collins, J. (2022). Design of a single stage centrifugal pump. International Research Journal of Modernization in Engineering Technology and Science. 10(1), 500-511. https://doi.org/www.irjmets.com [14] Sathish, K., Abilash, S., Balaji, S., Daniel, S. A., & Dhatchinamoorthi, V. (2021). A review on performance analysis of centrifugal pump impeller. International Journal of Research in Engineering, Science and Management. 4(6), 44-48. https://doi.org//www.ijresm.com [15] Pump101.com (2024). Understanding pumps, motors, and their Controls. Retrieved October 11, 2024. http://www.pumped101.com [16] Adeniyi, A. A., & Komolafe, O. D. (2014). Performance Analysis of an Experimental Centrifugal Pump. Nigerian Journal of Technology (NIJOTECH). 33(2) 149-155 https://doi.org/10.4314/njt.v33i2.2 [17] Ding, H., Visser, F. C., Jiang, Y., & Furmanczyk, M. (2011). Demonstration and validation of a 3d cfd simulation tool predicting pump performance and cavitation for industrial applications. Journal of Fluids Engineering, 133(1), 011101. doi:10.1115/1.4003196 [18] Si, Q., Bois, G., Liao, M., Zhang, H., Cui, Q., & Yuan, S. (2019). A comparative study on centrifugal pump designs and two-phase flow characteristic under inlet gas entrainment conditions. Energies, 13(1), 65. doi:10.3390/en13010065 [19] Zhang, M.-J., Pomfret, M. J., & Wong, C. M. (1996). Three-dimensional viscous flow simulation in a backswept centrifugal impeller at the design point. Computers & Fluids, 25(5), 497–507. doi:10.1016/0045-7930(96)00008- [20] Arndt, N., Acosta, A. J., Brennen, C. E., & Caughey, T. K. (1990). Experimental investigation of rotor-stator interaction in a centrifugal pump with several vaned diffusers. Journal of Turbomachinery, 112(1), 98. doi:10.1115/1.2927428 [21] Neumann, M., Schäfer, T., Bieberle, A., & Hampel, U. (2016). An experimental study on the gas entrainment in horizontally and vertically installed centrifugal pumps. Journal of Fluids Engineering, 138(9), 091301. doi:10.1115/1.4033029 [22] Hong, S. S., & Kang, S. H. (2004). Flow at the centrifugal pump impeller exit with circumferential distortion of the outlet static pressure. Journal of Fluids Engineering, 126(1), 81. doi:10.1115/1.1637630 [23] Gonza?lez, J., Ferna?ndez, J., Blanco, E., & Santolaria, C. (2002). Numerical simulation of the dynamic effects due to impeller-volute interaction in a centrifugal pump. Journal of Fluids Engineering, 124(2), 348. doi:10.1115/1.1457452 [24] Snyder, H. (2019). Literature review as a research methodology: an overview and guidelines. Journal of Business Research, 104, 333–339. doi:10.1016/j.jbusres.2019.07.039 10.1016/j.jbusres.2019.07.039 [25] Theconstructor.org (2024). Centrifugal pump components, working, types and application. Retrieved October 9, 2024. https://theconstructor.org/practical-guide/centrifugal-pump- working-types/2917/ [26] Li, H., Shen, Z., Liu, J., & Wang, C. (2010). Influence of pressure fluctuation on reflux valve in a self-priming pump with outer recirculation. ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting: Volume 1, Symposia – Parts A, B, and C. doi:10.1115/fedsm-icnmm2010-30216 [27] Abhari, F., Jaafar, H., & Yunus, N. A. M. (2012). A comprehensive study of micropumps Technologies. International Journal of Electrochemical Science. 7(2012), 9765-9780 https://doi.org/http://www.electrochemsci.org/ [28] Abo Elyamin, G. R. H., Bassily, M. A., Khalil, K. Y., & Gomaa, M. S. (2019). Effect of Impeller blades number on the performance of a centrifugal pump. Alexandria Engineering Journal. 58(2019), 39-48 doi: 10.1016/j.aej.2019.02.004 [29] Akhras, A.-R., El Hajem, M., Morel, R., & Champagne, J.Y. (2001). Internal flow investigation of a centrifugal pump at the design point. Journal of Visualization, 4(1), 91– 98. doi:10.1007/bf03182459 [30] Arun Shankar, V. K., Umashankar, S., Paramasivam, S., & Hanigovszki, N. (2016). A comprehensive review on energy efficiency enhancement initiatives in centrifugal pumping system. Applied Energy, 181(2016), 495–513. doi:10.1016/j.apenergy.2016.08. [31] Bai, L., Zhou, L., Han, C., Zhu, Y., & Shi, W. (2019). Numerical study of pressure fluctuation and unsteady flow in a centrifugal pump. Processes, 7(6), 354. doi:10.3390/pr7060354 [32] Athavale, M. M., Li, H. Y., Jiang, Y., & Singhal, A. K. (2002). Application of the full Cavitation model to pumps and inducers. International Journal of Rotating Machinery. 8(1), 45-56. https://doi.org/: [email protected] [33] Barrio, R., Ferna?ndez, J., Blanco, E., & Parrondo, J. (2011). Estimation of radial load in centri