Effect of African Velvet Tamarind (Icheku) Shell and Melon Shell Additives on Clay Blends for High Temperature Application

Iloabachie; I.C.C; Ezeugwu; Chime; A.C

doi:10.56201/ijemt.v10.no11.2024.pg23.35

📄 Download Paper

Effect of African Velvet Tamarind (Icheku) Shell and Melon Shell Additives on Clay Blends for High Temperature Application

Iloabachie, I.C.C, Ezeugwu, F, Chime, A.C

Abstract

The effect of agro-waste additives formulations African Velvet Tamarind (Icheku) and melon shells on Ehandiagu/Nkalaha clay blends was studied in this work. The clay samples collected from existing open mines, using digger and shovel, were cleaned, crushed using mortar and pestle and sieved with mechanized sieve arranged is descending order of fineness to obtain uniform particle sizes. The clay samples were soaked in a plastic container containing some quantities of de-ionized water. The water/clay mixture was vigorously stirred to ensure proper dissolution of the clay particles in water and the solution allowed settling for three days. The mixture was later filtered to remove unwanted materials and other debris in the mixture. The filtrate was allowed to settle for days and excess water decanted off. The clay obtained from this was sundried for three days and later oven dried at about 120oC for six hours. The resulting dry processed clay samples were ground and sieved to obtain uniform particle sizes. The icheku and melon shells were sundried for three days, pulverized and sieved to obtain uniform particle sizes. The chemical compositions of the melon shell, the African Velvet Tamarind (Icheku) shell and the clay samples were determined using XRF. The Ehandiagu and Nkalaha clay samples were blended in the ratios: 20:80; 60:40;

References

Aramide, F.O, Alaneme, K.K, Olubambi, P. A, and Borode, J. O. (2014). Characterization of Some Clay Deposits in South West Nigeria. Leonardo Electronic Journal of Practices and Technologies, p. 46-57. Borode I. O., Onyemaob O., Omotoyinbo J. A. (2000). Suitability of Some Nigerian Clays as Refractory Raw Materials, Nigerian Journal of Engineering Management, 3, p. 14-18. Mathew, G.O, Owoeye, S.S. (2016). Characterization of Abaji Clay Deposits for Refractory Applications. Leonardo Electronic Journal of Practices and Technologies. p. 115-126. Adondua S. (1998). Indigenous Refractory Raw Materials Base for Nigerian Steel Industry, Journal of the Nigerian Society of Chemical Eng, 7, p. 322-327. Obadinma E.O. (2000). Development of Refractory Bricks for Heat Treatment Facilities, J. of Sci. and Tech. Res., 2, p. 13-17. 8 8.1 8.2 8.3 8.4 8.5 8.6 8.7 5 10 15 20 25 Linear Shrinkage % Additives % Composition Clay Blends/Additives Clay Blends/Additives Aneke, L. E. (1982). Characterization of Oza- Nogogo Kaolinitic Clay Deposit. Journal of the Nigerian Society of Chemical Engineers, Vol. 1, pp. 22 - 27. Nwajagu C. O. (1995). Use of Simplex Method in Determination of Optimal Rational Composition Of Titles Producible From Nigerian Clays. Nigerian Journal of Technology, Vol. 16, No. Chima O. M. (2018). PhD Dissertation, Department of Metallurgical & Materials Engineering, Nnamdi Azkiwe University, Awka, Nigeria. Safer A, Yaseen I. and Raz M. (2017). Effects of Coal and Wheat Husk Additives on the Physical, Thermal and Mechanical Properties of Clay Brick. Boletin de la Societad Espannola de Ceramica. Pp 131-138. Demir, I. (2008). Effect of Organic Residues Addition on the Technological Properties of Clay Bricks. Waste Mange. Pp 622-627. E.S. Nweke, and E.I. Ugwu. (2007). Analysis and Characterization of Clay Soil in Abakaliki, Nigeria. The Pacific Journal of Science and Technology. Volume 8. Number 2. Hassan, S.B. (1985). Effect of Certain Additives on Some Refractory Properties of Kankara Clay. B. Eng. Project, Department of Metallurgical Engineering, Ahmadu Bello University, Zaria, Kaduna, Nigeria Lawal G., Amuda M. O. H., Adeosun S. O. (2005). The Effects of Cow Dung and Graphite on the Properties of Local Refractory Clay, NJERD, p. 1-8. Kefas H. M, Patrick D. O and Chiroma T. M. (2007). Characterization of Mayo-Belwa Clay. Leonardo Electronic J. Pract. Technol, 11: 123-130. Abubakar, I., Yauri U. A., Faruq U. Z., Noma, S. S., Sharif, N. (2014). Characterization of Dabagi Clay Deposits for Ceramics Potential. African Journal of Environmental Science and Technology. 8(8) pp. 455-459. Nnuka, E. E. and Agbo, U. J. E. (2000). Evaluation of the Refractory Characteristics of Otukpo Clay Deposit. NSE Technical Transaction, pp. 32- 40. Chester, J.H. (1973). Refractories, Production and Properties. The Iron and Steel Institute, pp 3- 13, 295-314. Maiti K.N and Kumar, S. (1992). Microstructure and Properties of a New Porcelain Composition Containing Crystallizing Glasses as Replacement for Feldspar. British Ceramic Trans. J.91 (1): 19-34. Altayework T. B. (2013). Effect of Firing Temperature on Some Physical Properties of Burnt Clay Brick Produced Around Addis Ababa. Thesis submitted to the Department of Civil Engineering for MSC in construction Technology and Management. pp. 23 – 23. Nnuka, E. E., Ogo, D. U. I. and Elechukwu, J. (1992). Sustainable Refractory Sourcing of Our Industries. Proceedings Annual conference of NMS, pp. 18 -20. Iloabachie1, I.C.C, Atuanya, C.U, Chime,A. C.. (2022). Effect of Heat Treatment on the Chemical Composition of Pentaclethra Macrophylla Pod. Engineering and Technology Journal e- ISSN: 2456-3358 Volume 07 Issue 09, Page No.-1437-1443 DOI: 10.47191/etj/v7i9.01, I.F. – 6.484. Decker J. in Siljan O. S. (2003). Advantages of Liquid Phosphate Bonded Refractories. Proceedings of Xth International Conference on Preparation of Ceramic Materials. Herl’any 18-20 June 2013. Intern Symposium 53/03 VDEH. Omowumi O.J. (2001). Characterization of Some Nigerian Clays as Refractory Material for Furnace Lining” Nigerian Journal of Engineering Metallurgy, (2) (3) Pp. 3.

Effect of African Velvet Tamarind (Icheku) Shell and Melon Shell Additives on Clay Blends for High Temperature Application

Abstract

References

More Articles from INTERNATIONAL JOURNAL OF ENGINEERING AND MODERN TECHNOLOGY