Extraction and Determination of Physiochemical Properties of Oil from Cotton Seed

Abdelmoez, W., Abdelfatah, R., Tayeb, A. and Yoshida, H., (2017). Extraction of cottonseed oil using subcritical water technology. AIChE Journal. American Institute of Chemical Engineers, vol. 57, no. 9, pp. 2353-2359. http://dx.doi.org/10.1002/aic.12454. Alamu OJ, Dehinbo O, Sulaiman MA (2010). Production and Testing of coconut oil Biodiesel fuel and its Blend. J. Sci. 16:95-104 Aremu M O, Olaofe O & Akintayo E. T. (2006). Chemical composition and physicochemical characteristics of two varieties of bambara groundnut (Vigna subterrenea) flours, J. applied sciences, 6(9), 1900 –1903. Aremu, M.O., Ibrahim, H. and Bamidele, T.O. (2015). Physicochemical Characteristics of the Oils Extracted from Some Nigerian Plant Foods – A Review. Chemical and Process Engineering Research, 32: 36- 52. www.iiste.org ISSN 2224-7467 (Paper) ISSN 2225-0913 (Online) Vol.32, 2015 36. Borchani, C., Besbes, S., Blecker, C.H. and Attia, H. (2010) Chemical Characteristics and Oxidative Stability of Sesame Seed, Sesame Paste, and Olive Oils. Journal of Agricultural Science and Technology, 12, 585-596. Edet, J. A., Sam, E. O., and Ahaneku, I. E., and Igbozulike, A. O. – (2022). Review of Relevant Evapotranspiration Models for Estimating Reference Evapotranspiration. Umudike Journals of Engineering and Technology (UJET); Vol. 8, No.1, pp. 88 – 97. Esuoso K, Lutz H, Kutubuddin M & Bayer E, (1998). Chemical composition and potential of some underutilized tropical biomass I: fluted pumpkin (Telfairia occidentalis), Food chem., 61, 487–492 Gecgel, U., Demirci, A.S., Dulger, G.C., Tasan, M., Arici, M. and Ay, O. (2015) Some Physicochemical Properties, Fatty Acid Composition and Antimicrobial Characteristics of Different Cold-Pressed Oils. La Rivista Italiana Delle Sostanze Grasse, 92, 187-200 Gerasimidis, K., Fillou, D., Babatzimcpoulou, M., Tassou, K. and Katsikas, H., (2017). Preparation of an edible cottonseed protein concentrate and evaluation of its functional properties. International Journal of Food Sciences and Nutrition, vol. 58, no. 6, pp. 486-490. http://dx.doi.org/10.1080/09637480701288488. PMid: 17710592. Knothe G (2008). “Designer” biodiesel: optimizing fatty ester composition to improve fuel properties. Energy Fuels 22: 1358-1364 Konu?kan, D.B., Yilmaztekinm. Mert, M. and Gençer, O. (2015). Physico-Chemical Characteristic and Fatty Acids Compositions of Cottonseed Oils. Journal of Agricultural Sciences, 23:253-259. Malik M., Ikhuoriaa, E. U and Ifijen, I. H. (2020). Extraction of physiochemical Characterization of Oils obtained from selected under-utilized oil bearing seeds in Nigeria. Publication of Chemical Society of Nigeria, Kano Chapter. http;//www.ajol.info/index.php/cs. Mengistie, T., Alemu, A., and Mekonnen, A (2018) Comparison of physicochemical properties of edible vegetable oils commercially available in Bahir Dar, Ethiopia. International Scientific Organization, Chemistry International, 4(2): 130- 135. Mittelbach M (1994). Analytical aspects and quality criteria for biodiesel derived from vegetable oils. In Proceedings of an Alternative Energy Conference: Liquid Fuels. Lub. Add. Biomass.1:151-156. Nkafamiya, I.I., Osemeahon, S.A., Dahiru, D. and Umaru, H.A. (2007) Studies on the Chemical Composition and Physicochemical Properties of the Seeds of Baobab (Adasonia digitata). African Journal of Biotechnology, 6, 756-759. O’Brien, R. D. O. and Wakelyn, P. J. (2015). Cottonseed oil: an oil for trans-free options. Journal of Food Tecnology, 16(11): 677-679. Oderinde K A, Ajayi I A, & Adewuyi A, (2009). Characterization of Seed and Seeds oil of Hura crepitans and the kinetics of degradation of the oil during heating, E-Journal of environment, agriculture & food chemistry, 8(3), 201 –208. Oluwole, F.A., Aviara, N.A., Umar, B. and Mohammed, A.B. (2015). Influence of variety and pre- treatment on oil properties of mechanically expressed castor oil. Global Advanced Research Journal of Engineering, Technology and Innovation. Özarslan, C. (2002). PH—postharvest technology: physical properties of cotton seed. Biosystems Engineering 83(2): 169-174. Rashid U, Anwar F, Arif M (2009). Optimization of base catalytic methanolysis of sunflower (Helianthus annus) seed oil for biodiesel production by using response surface methodology. Ind. Eng. Chem. Res. 48:1719-1726 Sam, E. O., Ndirika, V. I. O., Edet, J. A. and Udom, I. J. (2022a). Mathematical Model for Predicting Whole Kernel Recovery of a Palm Nut Cracking Machine using Mixed Variety of Palm Nut. Proceeding of 2022 Conference of Agricultural and Bioresource Engineering. UNN. Pp 458 – 469 Sam, E. O., Ndirika, V. I. O. and Etoamaihe, U. J. (2022b). Model Development and Optimization for Predicting Whole Kernel Recovery of Palm Nut Cracking Machine using Mixed Varieties of Palm Nut. Umudike Journals of Engineering and Technology (UJET); Vol. 8, No.1, pp. 37 – 48. Shah S. N. , Mahesar S. A. , Abro K. A. , Sherazi S. T. H. , Nizamani S. M., Laghari Z. H. , Panhwar T. , T. H. Shaikh and G. A. Mugheri (2017). FTIR Characterization and Physicochemical Evaluation of Cottonseed Oil. Pak. J. Anal. Environ. Chem. Vol. 18, No. 1 (2017) 46 – 53. ISSN-1996-918X. http://doi.org/10.21743/pjaec/2017.06.04 Udom, I. J., Udofia, E. S., Nta, S. A., Usoh, G. A. and Sam, E. O. (2023) - Prediction of Piggery Wastewater Nutrient Attenuation by Constructed Wetland in a Humid Environment. International Journal of Innovative Science and Research Technology. IJISRT23SEP408 Vol.8 pp. 2585 – 2593 Usoh, G. A., Ahaneku, I. E., Ugwu, E. C., Sam, E. O., Itam, D. H., Alaneme, G. U. & Ndamzi, T. C. (2023). Mathematical modeling and numerical simulation technique for selected heavy metal transport in MSW dumpsite. Scientific Reports (2023) 13:5674. Zerihun, M., & Berhe, H. (2018). Physicochemical properties of Cotton seeds oil and its comparison with released and improved cotton varieties in Ethiopia. Acad. Res. J. Agri. Sci. Res, 6(7), 443-452.