References
1. Antia, O. O., Assian, U. E. and Ukaru, Y. N. (2021). Design and fabrication of a modified fish feed pelletizing machine. Global Journal of Engineering and Technology Advances, 7(2): 1 -11 Antia, O. O., Assian, U. E. and William, O. (2019). Effect of Moisture Content on Palm Nut Shell Fragmentation for Effective Separation of Kernel. International Journal of Mechanical and Civil Engineering, Vol. 2, (Issue 1), pp.48-55. Assian, U. E. (2019). Modelling of Some Physical Properties of Palm Nut Relevant to its Primary Processing. MEng Dissertation. University of Uyo, Nigeria, 213p. Assian, U. E. and Alonge, A. F. (2021). Some physical properties of kariya (Hildegardia barteri) nut/ kernel relevant to the design of its processing equipment. Global Journal of Engineering and Technology Advances, 7(2): 83–90. Assian, U. E., Okoko, J. U., Alonge, F. A., Udoumoh, U. I. and Ehiomogue, P. (2022). Development of Sustainable Products from Oil Palm Towards Enhancing National Food Security: A Review. Scientific Journal, Agricultural Engineering, University of Belgrade, Faculty of Agriculture, Belgrade-Zemun, 1: 15 -35 Assian, U., Antia, O. and Olosunde, W. (2021). Predicting Cracking Efficiency and Kernel Breakage of Centrifugal Nut Cracker. International Journal of Advances in Engineering and Management (IJAEM), Volume 3, Issue 5, pp: 1211-1217. FAO (2005). Small-scale Palm Oil Processing in Africa. Food and Agricultural Organization (FAO) Agricultural Series 148. pp. 1-55. FAO (2011). Processing and Preservation (Module 8): Junior Farmer Field and Life School –Facilitator’s Guide. FAO Viale delle Terme di Caracalla, 00153 Rome, Italy: pp.1- 44. Hartley, C.W.S. (1988). The Oil Palm. Longman Group Limited London. pp. 67 Khurmi, R. S. and Gupta, J. K. (2012). A Text Book of Machine Design. Eurasia Publishing house/ (PVT.) Ltd, Ram Nagar, New Delhi, 1230p. Muthurajah, R. N. (2002). Palm Oil Factory Hand Book. Palm Oil Res. Institute, New Delhi. pp. 16-80 Oil World Annual, (2000). ISTA Mieike GmbH., Hamburg. Germany. OLOSUNDE, William Adebisi; ASSIAN, Ubong Edet; ONWE, David Nwabueze (2023). A Case Study on the Analytical Design and Simulation of Palm Nut Cracker Using Customized M236 Machine Design Spreadsheet. International Journal of Scientific Engineering and Science, 7 (5): 88-93. Oshiobugie, M., Atumah, E. V, Nnabuife, A., Ariavie, G. O. and Sadjere, E. G. (2017). Design of a Palm Bunch Stripping Machine Suitable for use in Benin City , Edo State , Nigeria. 7(5), 413–417. Pantzaris, T.P. and Mohd, J.A. (2001). Properties and Utilization of Palm Kernel Oil Malaysian Palm Oil Board, Brickendon, Hertford S.G/38NL.UK. Rufus, O. C. and Emmanuel, A. A. (2021). Improving design management in palm kernel nut cracking and separating machine analysis. World Journal of Engineering Research and Technology, 7(2): 36-77. Ubong, E. A., Orua, O. A. and William, A. O. (2021). Empirical Model for Predicting Volume of Palm Nut with Respect to its Moisture Content. Research Inventy: International Journal of Engineering and Science, Vol.11, Issue 5, pp 31-36. Undiandeye, S. A., Markson, I. E., Offiong, A. A., Offiong, A., and Ihom, A.P. (2024). Design of a Movable Palm Fruit Bunch Stripper for Oil Extraction. International Journal of Engineering and Modern Technology (IJEMT), 10 (7): 175- 193.
