References
Adebayo, A. A. (2004). Development and Performance Evaluating of a Motorized palm Nut cracking machine. Proceeding of the Annual Conference, Nigeria Institution of Agricultural Engineers. Vol. 26, pp. 326-330. Akubuo, C. O., Eje, B. E. (2002). Palm kernel and Shell Separator. Bio-systems Engineering, 81(2), 193-199. Doi:http://doi.org/10.1006/bioe.2001.0029. Alade, E. I., Koya, O. A., and Omidiji, B. V., (2020). Development of a modified palm-nut cracker. Agricultural Engineering International: CIGR Journal, 22(1), pp. 204-214. Andoh, P. Y., Agyare, W. A., and Dadzie, J. (2015) selection of an ideal mesh size for the cracking unit of a palm kernel processing plant. Journal of Science and Technology. Vol. 30 No.3, pp. 109-118. Antia, O. O; Olosunde, W., and Offiong A. (2014). Determination of optimum moisture content of palm nut cracking for efficient production of whole kernel. Nigerian Journal of Technological Development, vol. 11, No. 2, pp. 27-30. Anyane, S. L. (1966) The Oil Palm Industries of West Tropical Africa. PhD Dissertation at Stanford University. Apeh, F. I., Yahaya, B. S., Achema, F., Fabiyi, M. O., and Apeh, E. S. (2015). Design analysis of a locally fabricated palm kernel shells grinding machine. American Journal of Engineering Research. 4(11), 1-7. Asadullah, M., Adi, A. M., Suhada, N., Malek, N. H., Saringat M. I., and Azdarpour, A. (2014) “Optimization of palm kernel shell torrefaction to produce energydensified bio-coal,” energy Conversion and Management, vol. 88 pp. 1086-1093, 2014. Asoiro, F. U and Udo, U. C (2013). Development of motorized oil palm fruit rotary digester. Nigerian Journal of Technology, vol. 32. No 3, pp. 455-462. Babatunde, O. O. and Okoli, J. O. (1988). “Investigation into the effect of nut size on the speed needed for cracking palm nut in centrifugal nut cracker, “Nigerian Journal of Palm and Oil Seeds, vol. 9, pp. 84-88. Badmus, G. A. (1991) “NIFOR Automated Small Scale Oil Palm Processing Equipment, its need, development and effectiveness “Proceeding of PORIM INTERNATIONAL Palm Oil Conference, Nigeria 9-14 September 1990, Nigeria. Babatunde, O. O., Ige, M. T., and Makanjuola, G. A., (1988). Effect of sterilization on fruit recovery in oil palm fruit processing. Journal of Agricultural Engineering Research, vol. 41, Issue 2, pp. 75-79. Cornish, E. H. (1991). Materials and Designer, Cambridge University Press, Cambridge, 28-29. Emeka, V. E. and Julius .O.M. (2007). “Nutritional Evaluation of Palm Kernel Meat Types1. Proximate Composition and Metabolizable energy Values,” African Journal of Biotechnology vol. 6, issue 21, pp. 2484-2486. Fashing, A. B; Disdrodola, O. S; and Hammed, I. A., (2017). Development and performance evaluation of and oil palm fruit digester, Bioprocess Engineering 1(2): 49-53. http://www.sciencepublishinggroup.com/j/be doi:10.11648/j.be.20170102.13. Food and Agricultural Organization (2002) Statistical Yearbook. Journal for Food and Agricultural Organization, 2/2. Food and Agricultural Organization (2004) Statistical Yearbook. Journal for Food and Agricultural Organization, 2/2. Ibiyeye, D., Dlunloyo, O., Aderemi, A., Emmanuel, I., Akala, A., and Owolola, O. (2022). Design and development of a palm kernel nut unit. Technology audit and Production Reserves, 1/3(63), pp. 30-44, doi:http://doi.org/10.15587/2706-5448.2022.253931. Ibrahim, I. D., Jamiru, J., Sofuwa, O., and Onuoha, O. J., (2016). Design and performance evaluation of horizontal-shaft palm kernel cracking machine. Proceeding of Covenant University-3rd International Conference on African Development. Issues. pp. 337-3341. . Mba, O. I., Dumont, M. J., Ngadi, M. (2015) “Palm Oil Processing, characterization and utilization in the food industry – A review, “Food Bioscience, Vol. 10, pp. 26-41. Mosarof, M. H., kalam, M. A., Masjuki, H. H., Ashraful, A. M., Rashed, M. M., Imadadul, H. K., Monirul, I. M. (2015). “Implementation of palm biodiesel based on economic aspects, performance, emission, and wear characteristics, Energy,” Conversion and Management, Vol. 105 pp. 617-629. Ndegwe, N. A., (1987). The oil Palm in Rivers State of Nigeria. Pp: 103-104. Norazura, A. M. H. (2017). Usage of palm oil, palm kernel oil and their fractions as confectionery fats. Journal of Oil Palm Research, 29(3), 301-310. Dio: http//dio.org/10.21894/jopr.2017.2903.01. Offiong, A. (2024) Design and Production of Palm Kernel Cracking Machine, Undergraduate Project work in the Department of Mechanical and Aerospace Engineering, University of Uyo-Nigeria for the award of B.Eng. Degree. Okoli, J. U. (2022). Optimum during time for palm nuts for efficient nut cracking in small scale oil palm fruit processing mills. Global Journal of Engineering Research. Vol. 2, No. 1, 2003, pp. 7-10. Ologunagba F. O., (2012). Design and Evaluation of a Horizontal shaft palm nut cracking machine. Journal of Engineering and Applied Science, Vol. 4, pp 81. Taofik, O. K; Adesola, O. K; Abu, R., and Olantunde, A. N., (2019). Development and performance evaluation of small-scale palm kernel cracker. International Journal of Mechanical and Civil Engineering, vol 2, Issue 1, pp. 15-27. Udo, S. B., Adisa, A. F., Ismila, S. O and Adejujyibe, S. B., (2015). Development of palm kernel nut cracking machine for rural use. Agric Eng Int: CIGR Journal 17(14): 379-388.
