Analysis Of Speed Control of Induction Motor Performance Under Pulse Width Modulation and Phase Angle Controlling Techniques

Echegi Judith Unoma; Echegi Christian Uche

doi:10.56201/ijemt.v10.no7.2024.pg116.126

📄 Download Paper

Analysis Of Speed Control of Induction Motor Performance Under Pulse Width Modulation and Phase Angle Controlling Techniques

Echegi Judith Unoma and Echegi Christian Uche

Abstract

In this research, the speed control of induction motor using PWM and Phase angel controlling techniques was investigated under the following conditions. In the first stage, the induction motor was operated at a speed set point of 2830 RPM and with rated torque 10Nm. While in the second part, the induction motor was operated at 50% of the rated set point speed of 1415 RPM and 50% of the rated torque (5Nm). The result shows that PWM and phase angle controllers exhibited varying degrees of high efficiency in the reduction of speed overshoot and settling time. From the performance improvement of the simulation carried out, the PWM controller reduced the speed response overshoot and settling time of the phase angle controller by 1.51% and 13.51% respectively for the reference speed set point of 2830 RPM and torque of 10NM. But for the case of 50% of these rated parameters of speed set point and torque, the reduction in speed overshoot and settling time of phase angle controller by the PWM are 15.11% and 13.64% respectively. This implies that the speed control under PWM leads in efficiency of machine operations and effective energy utilization.

References

Mohammed Alizadeh, Mahyar Masourni and Ehasn Ebrahim (2017), Close Loop Speed Control of Induction Motor using Constant V/F Applying SPWM and SVPWM based Inverter, International Journal of Engineering and Advanced Technology (IJEAT), Vol. 6, Issues 5, 234 – 240. Echegi Judith Unoma, Ilo Fredrick and Echegi Christian Uche (2022), Improving the Speed Control of the Induction Motor Using Pulse Width Modulation Technique, American Journal of Applied Sciences and Engineering, Vol. 3, No. 3, 1-11. Egwaile J. O., Oriahi M.A., and Omoze E.L (2016) Speed Control of Induction Motor Using modified Pulse Width Modulation Technique, International Journal of Electrical and Telecommunication System Research, Vol.8, No 8, 109 – 116. Iidarabadi Rahim and Ahmadi Azadeh (2017), Simulation study of space Vector Pulse Width Modulation Feeding a three phase induction motor, International Journal of Research studies in Electrical and Electronic Engineering, Vol. 3, Issue 2, 19 – 25. Ahamed Raiz S., Chandra Sekhar J.N and Dinakara Prasad R. P (2015), Special Control of Induction Motor by using Intelligence Techniques, International Journal of Engineering Research and Application, Vol. 5 (Part 5), 130 – 135. Pawer Harsha Chavan, Shinde Ashwini and Rugandhard Chavan (2015) Speed Control of Induction Motor using PWM Technique, International Journal of Engineering Research and Technology, Vol. 4, Issue 04, 174 – 179. Rahman Sharjil, Azwin Aidil and Abidin Zainal (2020) A review of induction Motor Speed Control Methods, International Journal of Core Engineering and Management, Vol. 3, Issue 5, 116 – 124. Rajeshbabu S., Manikanda B.V and Arulkumar A. (2018) Speed Control of A.C Induction Motor using PWM Controlled Voltage Source Invester, International Journal of Pure and Applied Mathematics, 118(24), 1-9. Echegi Judith Unoma (2021) Improving the Speed Control of Induction Motor using Pulse Width Modulation Technique, Master Degree Dissertation, Enugu State University of Science and Technology, Enugu, Nigeria, 6 – 12. Diaz A., Saltares R., Rodriguez C. Nunez R. F., Ortiz-Rivera E.I and Gonzalez-Lorente J. (2009, Induction Motor Equivalent Circuit for Dynamic Simulations, IEEE,

Analysis Of Speed Control of Induction Motor Performance Under Pulse Width Modulation and Phase Angle Controlling Techniques

Abstract

References

More Articles from INTERNATIONAL JOURNAL OF ENGINEERING AND MODERN TECHNOLOGY