Submit your papersSubmit Now
For Enquiries: [email protected]
IIARD LogoIIARD

Assessment of STATCOM Impact on Power Loss Reduction and Efficiency Improvement in Semi-Urban Distribution System

Ekeriance, D. E., Biragbara, P. B., Igbogidi, O.N & Obuah, E.C.

Abstract

The semi-urban distribution systems often grapple with power loss and inefficiency, primarily due to the growing demand for electricity and the aging infrastructure. STATCOM (Static Synchronous Compensator) has emerged as a promising solution to address these issues by enhancing voltage stability, reducing power losses, and improving overall system efficiency. This study aims to assess the impact of STATCOM on power loss reduction and efficiency improvement in semi-urban distribution systems. By analyzing the semi-urban distribution system and simulation data, the research will provide insights into the effectiveness of STATCOM in mitigating power distribution challenges and contributing to a more reliable and sustainable power supply. A comprehensive benefit for the Assessment of STATCOM Impact on Power Loss Reduction and Efficiency Improvement in Semi-Urban Distribution Systems are well addressed. Data collected includes: Station equipment, conductor size, step-up transformer, step-down transformer, and bus parameters. Again, Power losses, bus voltage magnitude and there ones were realized for evaluation. Critical buses were recorded at bus 9 for optimal sizing of about 2500KVAr. A load flow analysis showed that the active power loss and reactive power loss in the existing network were 85.63kW and 193.7167KVAr respectively. When STATCOM were introduced active power loss and reactive power were reduced from the values of 67.03kW and 143.71KVAr. The results obtained, when STATCOM was penetrated into the network, many of the bus voltage magnitude falls within IEEE statutory limit, hence electric power supply to the study area has improved.

Keywords

Reactive Power LossReal Power LossElectrical Transient Analysis Program

References

[1] Ikuobase, E., Olusegun, D. S., Mgbemena,C. O. & Adeyeri, M K. (2018). Electric Power Generation Crisis in Nigeria. A Review of Causes and Solutions. International Journal of Integrated Engineering, 10(1), 47 – 56. [2] Ekeriance, D. E., & Wokoma, B. A., (2024) Assessment of 11KV Distribution Network for Minimization using Analytical Technique for capacitor sizing. International Journal of Innovation Research in Electrical, Electronic, Instrumentation and Engineering. 12(2): 1- [3] Gupta, J. B. (2009). Transmission & Distribution of Electrical Power. SK Kataria and Sons. [4] Kazmi, S. A. A., Khan, U., Ahmad, H. N. & Shin, D. R. (2020). A Techno-Economic Centric Integrated Decision Making Planning Approach for Optimal Assets Placement in Meshed Distribution Network across the Load Growth. Energies, 13(6), 1444-1456. Gupta, J. B. (2009). Transmission & Distribution Of Electrical Power. SK Kataria and Sons. [5] Badran, O. & Jalland, J. (2023). Active and Reactive Power Loss Minimization Along with Voltage Profile Improvement for Distribution Reconfiguration. Journal of Electrical and Computer Engineering, 14(10), 1193 – 1201. [6] Ale, T. O. (2015). Electrical and Electronics Engineering Lecture Note. Federal University of Technology Akure, Ondo State. [7] Igbogidi, O. N., Amadi, H. N., & Ekeriance, D. E., (2024). Analysis of High Voltage Direct Current Transmission Line Bus Voltage Using Load and Component Sizing Method. Journal of Recent Trend In Electrical Power Systerm,7(1) 1-9. [8] Ighalo, G. I., & Williams, A. A. (2012). Simulating Power Distribution Network in Nigeria. The Ikpoba-Hill District Network as A case Study. International Journal of Scientific Technology Research, 1(9), 1-8. [9] Ekeriance, D. E., Dumkhana., L., Philip-Kpae. F. O. & Aferonkhai, J.E (2024). Improvement of Electricity Supply to a Semi Urban Community Using STATCOM. International Journal of Engineering and Modern Technology (IJEMT),10 (4), 53-64 [10] Ekeriance D. E., Dumkhana L., & Philip-Kpae F. O. (2024), Analysis of Transient Instability on a 132KV Transmission grid Power System Using 4th Order Runge kutta Technique. African Journal of Electrical and Electronics Research, 6(1), 17-32.

More Articles from INTERNATIONAL JOURNAL OF ENGINEERING AND MODERN TECHNOLOGY