Application of Optimised Models in Heat Sink Environments for Heat Transfer. A Review

Ali HM, Arshad A (2017) Experimental investigation of n-eicosane-based circular pin-fin heat sinks for passive cooling of electronic devices. Int J Heat Mass Transf 112:649–661 Ali HM, Ashraf MJ, Giovannelli A, Irfan M, Irshad TB, Hamid HM, Hassan F, Arshad A (2018) Thermal management of electronics: an experimental analysis of triangular, rectangular, and circular pin-fin heat sinks for various PCMs. Int J Heat Mass Transf 123:272–284 Bahiraei M, Heshmatian S, Goodarzi M, Moayedi H (2019) CFD analysis of employing a novel ecofriendly nanofluid in a miniature pin fin heat sink for cooling of electronic components: effect of different configurations. Adv Powder Technol 30(11):2503–2516 Chen K, Xing J, Wang S, Song M (2017) Heat source layout optimisation in two-dimensional heat conduction using the simulated annealing method. Int J Heat Mass Transf 108:210–219 Dammak K, El Hami A (2021) Thermal reliability-based design optimisation using the Kriging model of a PCM-based pin fin heat sink. Int J Heat Mass Transf 166:1–21 Denga T, Rana Y, Yina Y, Liu P (2020) Multi-objective optimisation design of thermal management system for lithium-ion battery pack based on non-dominated sorting genetic algorithm II. Appl Therm Eng 164:1–11 Durgam S (2021) Forced convection from IC chips on printed circuit boards generating high heat fluxes. J Inst Eng (India): C 102(4):933–940 Durgam S, Sundararajan T (2019) Conjugate forced convection from heat sources on substrates of different thermal conductivities. J Thermophys Heat Transf 33(4):1–13 Durgam S, Venkateshan SP, Sundararajan T (2019) Effect of thermal conductivity on cooling of a square heat source array under natural convection in a vertical channel. Heat Transf Eng 41(11):949–960 Esmaeili H, Armaghani T, Abedini A, Pop I (2019) Turbulent combined forced and natural convection of nanofluid in a 3D rectangular channel using a two-phase model approach. J Therm Anal Calorim 135(6):3247–3257 Farzanehnia A, Khatibi M, Sardarabadi M, Passandideh-Fard M (2019) Experimental investigation of multiwall carbon nanotube and paraffin-based heat sinks for electronic device thermal management. Energy Convers Manage 179:314–325 Fukuie K, Iwata Y, Iwase E (2018) Design of substrate stretchability using origami-like folding deformation for flexible thermoelectric generator. Micromachines 9(7):1–8 Grand View Research (2023) Thermal management technologies market analysis by product (hardware, software, interface, substrates), by application (computers, consumer electronics, telecommunication, automotive electronics, renewable energy), and segment forecasts to 2024, Market Analysis Report. https://www.grandviewresearch.com/industryanalysis/thermal-management-technologies-industry Hadavand M, Yousefzadeh S, Akbari OA, Pourfattah F, Nguyen HM, Asadi A (2019) A numerical investigation on the effects of mixed convection of Ag-water nanofluid inside a simcircular lid-driven cavity on the temperature of an electronic silicon chip. Appl Therm Eng 162:1–45 Haghighi SS, Goshayeshi HR, Safaei MR (2018) Natural convection heat transfer enhancement in new designs of plate-fin-based heat sinks. Int J Heat Mass Transf 125:640–647 Hotta TK, Balaji C, Venkateshan (2015) Experiment-driven ANN-GA-based technique for optimal distribution of discrete heat sources under mixed convection. Exp Heat Transf 28(3):298–315 Ikeda S, Nagai T (2018) Development of an optimisation method for a heat source and a chart for operational design using a genetic algorithm and lagrange multiplier. Jpn Archit Rev 2:280–291 Ikhlaq M, Yasir M, Demiro?lu M, Arik M (2021) Synthetic jet cooling technology for electronics thermal management—a critical review. IEEE Trans Compon Packag Manuf Technol 11(8):1156–1170 Jiaqiang E, Han D, Qiu A, Zhu H, Deng Y, Chen J, Zhao X, Zuo W, Wang H, Chen J, Peng Q (2018) Orthogonal experimental design of liquid cooling structure on the cooling effect of a liquid cooled battery thermal management system. Appl Therm Eng 132:508–520 Karimi G, Li X (2013) Thermal management of lithium-ion batteries for electric vehicles. Int J Energy Res 37(1):13–24 Krishna VM, Kumar MS (2019) Numerical analysis of forced convective heat transfer of nanofluids in micro-channels for cooling electronic equipment. Mater Today Proc 17:295–302 Lai Y, Wu W, Chen K, Wang S, Xin C (2019) A compact and lightweight liquid-cooled thermal management solution for cylindrical lithium-ion power battery packs. Int J Heat Mass Transf 144:1–37 Lin Z, Liu H, Li Q, Liu H, Chu S, Yang Y, Chu G (2018) High thermal conductivity liquid metal pad for heat dissipation in electronic devices. Appl Phys A 124:1–6 Lutsenko NA (2018) Numerical model of two-dimensional heterogeneous combustion in porous media under natural convection or forced filtration. Combust Theor Model 22(2):359–377 Lv Y, Liu G, Zhang G, Yang X (2020) A novel thermal management structure using serpentine phase change material coupled with forced air convection for cylindrical battery modules. J Power Sources 468:1–9 Mathew VK, Hotta TK (2018) Numerical investigation on optimal arrangement of IC chips mounted on a SMPS board cooled under mixed convection. Therm Sci Eng Prog 7:221– 229 Mathew VK, Hotta TK (2019) Role of PCM based mini-channels for the cooling of multiple protruding IC chips on the SMPS board-a numerical study. J Energy Storage 26:100917 Mebarek-Oudina F (2017) Numerical modelling of the hydrodynamic stability in a vertical annulus with heat sources of different lengths. Eng Sci Technol 20(4):1324–1333 Murshed SS (2016) Introductory chapter: electronics cooling—an overview. Electron Cool 1– 11. https://doi.org/10.5772/63321. Patil NG, Hotta TK (2020) A combined numerical simulation and optimisation model for the cooling of IC chips under forced convection. Int J Mod Phys C 31(3):1–37 Peterson GP, Ortega A (1990) Thermal control of electronic equipment and devices. Adv Heat Transf 20:181–314. Elsevier Purusothaman A (2018) Investigation of natural convection heat transfer performance of the QFNPCB electronic module by using nano-fluid for power electronics cooling applications. Adv Powder Technol 29:996–1004 Putra N, Ariantara B (2017) Electric motor thermal management system using L-shaped flat heat pipes. Appl Therm Eng 126:1156–1163 Qin P, Liao M, Mei W, Sun J, Wang Q (2021) Experimental and numerical investigation of a hybrid battery thermal management system based on forced air convection and internal finned structure. Appl Therm Eng 195:1–14 Qin P, Liao M, Zhang D, Liu Y, Sun J, Wang Q (2019) Experimental and numerical study on a novel hybrid battery thermal management system integrated forced air convection and phase change material. Energy Convers Manage 195:1371–1381 Qiu Y, Garg D, Zhou L, Kharangate CR, Kim S-M, Mudawar I (2020) An artificial neural network model to predict mini/micro-channel saturated flow boiling heat transfer coefficient based on universal consolidated data. Int J Heat Mass Transf 149:1–19 Sarper B, Saglam M, Aydin O (2018) Experimental and numerical investigation of natural convection in a discretely heated vertical channel: effect of the blockage ratio of the heat sources. Int J Heat Mass Transf 126:894–910 Selimefendigila F, Oztop HF (2020) Mixed convection in a PCM-filled cavity under the influence of a rotating cylinder. Sol Energy 200:61–75 Sharma A, Tyagi VV, Chen CR, Buddhi D (2009) Review on thermal energy storage with phase change materials and applications. Renew Sustain Energy Rev 13:318–345 Sheng L, Su L, Zhang H, Li K, Fang Y, Ye W, Fang Yu (2019) Numerical investigation on a lithium ion battery thermal management utilising a serpentine channel liquid cooling plate exchanger. Int J Heat Mass Transf 141:658–668 Tian Z, Gan W, Zhang X, Gu B, Yang L (2018) Investigation on an integrated thermal management system with battery cooling and motor waste heat recovery for el