Critical Study of Dissimilar Metal Welding of Different Stainless Steels

Almirov,A.I.,Chumaevskii,A.V.,Utyaganova,V.R.,Gusarova,A.V.,Gurianov,D.A.,Rubtsov,V.E., Beloborodov,V.A.,Sokolov,P.S. and Kolubaev,E.A.(2023).Structure and properties ofdissimilar joint of To and Al alloys obtained by friction stir welding.Russian Physics Journal.https://doi.org/10.1007/s11182-023-03031-x. Avery,R.E. (2012).Pay attention to dissimilar –metals welds: Guidelines for welding Baskoro,A.S.,Amat,M.A.,Widyianto,A.,Putra,A.D. and Aryadhani,A.S.(2023).Investigation of weld geometry,mechanical properties and metallurgical observations of activated flux tungsten inert gas (A-TIG) welding on 304H austenitic stainless steel.Transactions of Indian Institute of Metals.10.007/s12666-023-03180-0. Bettahar,K.,Bouabdallah,M.,Badji,R.,Gaceb,M.,Kahloun,C.and Bacroix,B.(2015).Microstructure and mechanical behaviour in dissimilar 13Cr/2205 stainless steel welded pipes.Materials and design,85(1):221-229. Casalino,G.(2017).Advances in welding metal alloys,dissimilar metals and additively manufactured parts.Metals. Cui,S.,Tian,F.,Zhang,S.,Cai,H. and Yu,Y.(2023).Numerical simulation and mechanical properties of 6063/6082 dissimilar joints by laser welding.Coatings, Vol.13(12).https://doi.org/10.3390/coatings13122049. Das, C. R., Bhaduri, A. K., Srinivasan, G., Shankar, V., and Mathew, S. (2009). Selection of filler wire for and effect of auto tempering on the mechanical properties of dissimilar metal joint between 403 and 304L(N) stainless steels. Journal of Materials Processing Technology, 209, 1428–1435.Doi: 10.1016/j.jmatprotec.2008.03.086 Devaraju, A. (2015). An Experimental Study on TIG welded joint between Duplex Stainless Steel and 316L Austenitic Stainless Steel. SSRG International Journal of Mechanical Engineering (SSRG – IJME), 2(10):1-4. dissimilar steels .Journal of science and Engineering. Foumani,M. and Moosavy,N.M.(2023).The effect of vacuum brazing time on the microstructure and mechanical properties if Ti-6Al-4V to 316L dissimilar joining using BNi-2filler metal.https://doi.org/10.1016/j.jalp.2023.i00176. Gadallah,E.A.,El Aal,M.I.A.,Mohammed,A.Y.(2023).Effect of filler on the microstructure and corrosion of similar/dissimilar gas tungsten inert gas welding of aluminium alloy joints.Sci Rep,13.https://doi.org//10.1038/s41598-023-44421-y. Hannu,H.,Perti,A.,Anssi,B.(2006).Dissimilar metal joints and their performance in nuclear power plant and oil refineries conditions. Hayatu,M.A. and Bello,K.A. (2018).Review of microstructure and mechanical properties of dissimilar steel welds.Proceedings of the 34th annual conference of the Nigeria metallurgical society (NMS) held at Ahmadu Bello University ,Zaria, 31st October-3rd November 2018. Hayatu,M.A.,E.T.Dauda and Aponbiede,O.(2021).Shielded metal arc evaluation of dissimilar weldments of high strength low alloy steel and austenitic stainless steel. MSc Dissertation submitted to Department of metallurgical and materials engineering, Ahmadu Bello University, Zaria, Nigeria. Hernández-Trujillo, S. L., Lopez-Morelos, V. H., García-Rentería, M. A., García-Hernández, R., Ruiz, A., & Curiel-López, F. F. (2021). Microstructure and Fatigue Behavior of 2205/316L Stainless Steel Dissimilar Welded Joints. Metals, 11(93):1-18. https://doi.org/10.3390/met11010093 Jiang,F.,Wang,W.,Zang,X. and Gong,W.(2023).Microstructure and mechanical properties of friction stir lap welding joint of Al/Cu dissimilar metals.Metals,13(12).https://doi.org/10.3390/met13121969. Kaya,I.,Barser,T.A. and Kahramanan,N. (2023).Mechanical properties and corrosion behaviour of of similar/dissimilar resistance spot welded automotive aluminium alloys.Materials Science and Engineering Technology.https://doi.org/10.1002/mawe.202200200. Kharthick,K.,Malarvizhi,S.,Balasubramanian,V.,Krishnan,S.A.,Sasikala,G.and Shaju,K.A.(2018).Tensile and impact toughness properties of various regions of dissimilar joints of nuclear grade steels.Nuclear engineering and technology,50(1):116-125. Kumar, L. S., Reddy, V. J., And Reddy, P. S. (2020). Investigation on mechanical properties of ferritic and austenitic stainless steels joint (dissimilar) using plasma arc welding. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10(3), 6263-6269. Lippold,J.C.and Kotecki,D.J.(2005).Wielding metallurgy and weldability of stainless steel. John Wiley and Sons, New Jersey. Liu,K.,Li,Y. and Wang,J.(2016).Improving the interfacial microstructure evolution of To/stainless steel GTAW joint by employing Cu filler metal.Manufacturing Process, 31.2165-2175. Manjunath,B.N.,Jayaprakash,P.MishraA,A.,Karthik,H.S.,Arulkirubakaran,D.(2023).Joining dissimilar metals using cold metal transfer process. A review. Welding in the world. Mendoza, B.,Zepeda,C.M.and Hernandez (2010).Dissimilar welding of superduplex stainless steel/HSLA steel for offshore application joined by GTAW.Scientific Research,2:520-528. Outokumpu (2013).Handbook of stainless steel.Oyj Publishers,Awesta,Sweden. Ratanathavorn, W. (2017). Dissimilar joining of aluminium to ultra-high strength steels by friction stir welding (Doctoral thesis). KTH Royal Institute of Technology, Industrial Engineering and Management, Department of Production Engineering. SE-100 44 Stockholm, Sweden. Rodriguez, B. R., Miranda, A., Gonzalez, D., Praga, R., & Hurtado, E. (2020). Maintenance of the Austenite/Ferrite Ratio Balance in GTAW DSS Joints Through Process Parameters Optimization. Materials, 13(780):1-14. https://doi.org/10.3390/ma13030780. Sadek,D.A.(2015).Dissimilar materials weldability concepts.Technology and lead-materials engineering. Seerangan,R.N.,Chinnasamy,R.,Natrajan,R. and Kumar,A.A.(2022).Stress corrosion cracking of friction stir welded AISI 304 and 316L dissimilar steel alloys.Materials Today: Proceedings,68(5):1663-1666.10.1016/j.matpr.2022.08.125. Singh, A. P., and Mangal, D.(2017).Study and assessment of mechanical properties of resistance spot weld of two dissimilar metals (AISI). International Journal of Engineering Sciences and Research Technology, 6(10), 297-302.DOI: 10.5281/zenodo.1012521. Singh,R. (2012).Applied welding engineering: processes,codes and standards.Elsevier.Waltham,USA.Tandon,V.,Patil,A.P. and Kowshik,S. (2023).Impact of filler electrodes on welding properties of dissimilar welded 316L/201 austenitic stainless steels.Engineering Proceedings,59,90.10.3390/engproc2013059090. Tanrikulu,A.A.,Farhang,B.,Ganesh Ram,A.K.,Hekmatjou,H. And Amerinatanzi,A.(2023).Microstructure evaluation of magnetic field assisted dissimilar laser welding of NiTi to stainless steel.Journal of Manufacturing Science and Engineering.https://doi.org/10.1115/1.4064158. TOPCU, ?., ÇINAR, Ö., ALYANAKO?LU, A. E., ÇET?NER, B. N., and GÜLLÜO?LU, A. N. (2019). The Similar and Dissimilar Spot Welding of 304 and 316L Austenitic Stainless Steels. ALKU Journal of Science, 1(2):55-59. Venkata,A. K., Truman, C. E., and Smith, D. J. (2015). Characterising Residual Stresses in a Dissimilar Metal Electron Beam Welded Plate. Procedia Engineering, 130, 973- 985.https://doi.org/10.1016/j.proeng.2015.12.250 Verma, J., Taiwade, R. V., Khatirkar, R. K., & Kumar, A. (2016). A Comparative Study on the Effect of Electrode on Microstructure and Mechanical Properties of Dissimilar Welds of 2205 Austeno-Ferritic and 316L Austenitic Stainless Steel. Materials Transactions, 57(4), 494 -500.Doi: 10.2320/matertrans.M201532. Wang,W.(2016).Weld failure analysis : A case study. Sripriyan ,K.,Ramu,M. and Thyla,P.R.(2023).Characterization of dissimilar welding of AISI 409 Ferritic to AISI 316L austenitic stainless steel using AISI 308 filler wire under different temperature conditions. Lecture Notes in Mechanical Engineering. Mvola,B.,Kah,P.and Martikaninen,J.(2013).Dissimilar ferrous metal welding using advanced gas arc welding processes.Rev.Materials Science 38,125-135.