Submit your papersSubmit Now
For Enquiries: [email protected]
IIARD LogoIIARD

Analysis of Automatic Hand Sanitizer Using PIC16F877A Microcontroller

Mubarak Abdurrahman, Ismaheel Adewale Badru , Habu, Abubakar, Abdulkadir Abubakar, and Esau Danladi

Abstract

The research was conducted to analyze an automatic non contactless hand sanitizer dispensing machine. Many researches focus on manual dispensers which makes the hand sanitizer dispenser to be contaminated. The system consists of monitoring and alert features. The liquid level of hand sanitizer was monitored by using LED-RED while alerting the system to remind the owner to refill the hand sanitizer if the level been low. Other than that, PIR sensor was used to detect the presents of human in nearby and thereafter dispenses the hand sanitizer. An automatic hand sanitizer dispensing machine was developed using microcontroller as the main brain behind of the system operation. Hand sanitizer dispenser can be used in many public places and else. The system employed usage of an ultrasonic sensor, which senses the hand placed near it, and connected to electrically operated pump that pumps out the hand sanitizer liquid for its users. The IR Sensor is the photodiode used for sensing the human hand detection and it is used to control the motor pump from the liquid.

Keywords

Automatic hand sanitizerDiseaseMicrocontroller and PIR sensor.

References

[1]Akinsanmi, O., Amoran, A. E., Oluwole, A. S., Igwe, P. C. & Adejuwon, P. (2021). Design and Fabrication of an Automated Low-Cost Non-Contact Temperature Scanner and Sanitizer for Covid-19 Prevention. FUOYE Journal of Engineering and Technology (FUOYEJET), Volume 6, Issue 2, June 2021 ISSN: 2579-0625, 2579-0617 [2] Maliszewska, M., Mattoo, A., and van der Mensbrugghe, D. (2021). The Potential Impact of COVID on GDP and Trade: A Preliminary Assessment. World Bank Policy Research working paper 9211. Available online at open knowledge. Worldbank.org/handle/10986/33605. [3] Brassard, J., Markham, D. and Truhanovitch, A. (2012). Replacement Hand Washing System an Interactive Qualifying Project submitted to the Faculty of the WORCESTER POLYTECHNIC INSTITUTE in partial fulfillment of the requirements for the January 11, 2012 . Project Number: MQF-IQP 4509 [4] Rusimamto, P. W., Nurhayati, N., Yundra, E., Rahmadian, R., Widodo, A., Dermawan, M. A. (2020). Automatic Hand Sanitizer Container to Prevent the Spread of Corona Virus Disease. Advances in Engineering Research, International Joint Conference on Science and Engineering (IJCSE 2020). volume 196 [5] Lee, J., Lee, J. Y., Cho, S. M., Yoon, K. C., Kim, Y. J., & Kim, K. G. (2020). Design of automatic hand sanitizer system compatible with various containers. Healthcare informatics research, 26(3), 243-247. [6] e-hir.org (2021, Thur. 18). Design of Automatic Hand Sanitizer System Compatible with Various Containers. https://www.e-hir.org [7] Das, A., Barua, A., Mohimin, M.A., Abedin, J., Khandaker, M.U. and Al-mugren, K.S. (2021).Development of a Novel Design and Subsequent Fabrication of an Automated Touchless Hand Sanitizer Dispenser to Reduce the Spread of Contagious Diseases. Healthcare 2021, 9, 445. https://doi.org/10.3390/healthcare9040445 [8] Edozie, E., Janat, W. and Kalyankolo, Z. (2020). Design and Implementation of a Smart HandSanitizer Dispenser with Door Controller using ATMEGA328P. International Journal of Engineering and Information Systems (IJEAIS). 4(6), Pp14-18 [9] Rusimamto, P. W., Nurhayati, N., Yundra, E., Rahmadian, R., Widodo, A., Dermawan, M. A. (2020). Automatic Hand Sanitizer Container to Prevent the Spread of Corona Virus Disease. Advances in Engineering Research, International Joint Conference on Science and Engineering (IJCSE 2020). volume 196 [10] Sharnil,R., Anirban, S., Ketan, K. (2020). Smart epidemic tunnel: IoT-based sensor- fusion assistive technology for COVID-19 disinfection. https://doi.org/10.1108/IJPCC- 07-2020-0091 [11] Rojo, M. G., Sy, J. B., Calibara, E. R., Comendador, A. V., Degife, W., Sisay, A. (2020). Non-Contact Temperature Reader with Sanitizer Dispenser (NCTRSD). International Journal of Scientific and Research Publications, 10(9), pp 583 – 590 [12] Maurya et al (2020). Development of Autonomous Advanced Disinfection Tunnel to Tackle External Surface Disinfection of COVID-19 Virus in Public Places. Transactions of the Indian National Academy of Engineering 5:281–287 https://doi.org/10.1007/s41403-020-00141-7 [13] Mahammedi, N, A. and Mahammedi, A. (2020). Standalone solar-powered ultraviolet mobile disinfects bringing solar energy in the global fight against COVID-19 [14] SCTIMST (2020). scientists develop disinfection gateway & facemask disposal bin to fight COVID-19, Department of Science & Technology. https://dst.gov.in/sctimst- scientists-develop-disinfection-gateway-facemask-disposal-bin-fight-covid-19. (Accessed 29 June 2020) [15] Rakshit, D., Baral, B., Datta, S., Deb, P. B. and Mukherjee, P. (2016). Water Level Indicator. International Journal of Scientific & Engineering Research. pp. 7-10, vol. 7(4), 2016. [16] Zafirah Izni Binti Zainudin Low Yee and Raed Abdulla (2022). Smart hand sanitizer dispenser Journal of Applied Technology and Innovation (e -ISSN: 2600-7304) vol. 6, no. 1, (2022) 9

More Articles from INTERNATIONAL JOURNAL OF ENGINEERING AND MODERN TECHNOLOGY