International Journal of Engineering and Modern Technology (IJEMT )

E-ISSN 2504-8848
P-ISSN 2695-2149
VOL. 11 NO. 4 2025
DOI: 10.56201/ijemt.vol.11.no4.2025.pg122.129


Evaluation of Earthing Protection System of Substations: A Case Study of Federal Polytechnic Ile-Oluji, Ondo State

Olamiposi Ibukun DareAdeniran, Samuel Ibikunle Osafehinti, Adewole Oyewale, Adetunmbi


Abstract


This research evaluates the earthing protection systems across various electrical substation networks within Federal Polytechnic, Ile-Oluji, Ondo State, Nigeria. The assessment focused on measuring ground resistance values to determine the performance and reliability of earthing systems critical for equipment protection and personnel safety using earth resistance tester. Findings revealed that the Hostel Building, Engineering Substation, and Mega Substation (serving transformers and feeders) demonstrated low resistance values, indicating efficient earthing performance. Conversely, the Administrative Building exhibited significantly high resistance, suggesting issues such as poor soil conductivity and inadequate grounding design. Additionally, lightning arresters across substations consistently showed elevated resistance levels, likely due to isolated grounding configurations for surge protection. Recommendations include enhancing the Administrative Building’s earthing system through the addition of grounding rods, soil treatment, or complete redesign, inspecting lightning arrester grounds in the School of Agriculture and Mega Substations for improvements, and implementing routine testing and maintenance to ensure long- term system effectiveness. This evaluation underscores the importance of continuous monitoring and upgrades to maintain optimal grounding conditions in substation networks.


keywords:

Electrical Substation Networks, Earthing Resistance Tester, High Resistance, Low Resistance and Surge Protection.


References:


1. Ibrahim, A. O., & Jamil, M. (2023). *Recent Advances in Grounding Systems for Electrical
Power
Substations:
A
Review*.
IEEE
Access,
11,
54732-54744.
https://doi.org/10.1109/ACCESS.2023.3162998
Kumar, M., & Singh, A. (2022). *Design and Evaluation of Substation Earthing Systems: A
Comprehensive
Review*.
Energy
Reports,
8,
265-278.
https://doi.org/10.1016/j.egyr.2022.10.042.
Bhardwaj, R., & Gupta, A. (2021). *Analysis and Improvement of Earthing System
Performance in High-Voltage Substations*. Electrical Engineering Journal, 64(3), 125-
https://doi.org/10.1007/s00202-021-01199-9.
Chatterjee, S., & Jain, A. (2023). *Smart Monitoring of Substation Earthing Systems Using IoT
and Machine Learning Techniques*. International Journal of Electrical Power & Energy
Systems, 124, 105254. https://doi.org/10.1016/j.ijepes.2020.105254.
Ghosh, A., & Kaur, G. (2024). *Impact of Soil Resistivity on the Performance of Substation
Earthing Systems*. Journal of Electrical Engineering and Technology, 19(2), 653-660.
https://doi.org/10.1007/s42835-024-01659-7
Chen, M., & Zhang, Y. (2024). Grounding grids corrosion evaluation of electrified railway
based on two-stage optimization algorithm. IEEJ Transactions on Electrical and
Electronic Engineering. https://doi.org/10.1002/tee.24219
Ali, A., Reffin, J., & Oettle, N. (2023). Review: Factors affecting the performance of ground
electrodes
under
high
impulse
conditions.
Energies,
16(10),
https://doi.org/10.3390/en16104236
Rahman, M. A., Chuan, S. B., Fong, P. W., Alkharabsheh, O. H. M., & Sozon, M. (2024).
Factors influencing academic dishonesty among undergraduate students in higher
education institutions (HEIs) in Malaysia. Journal of Management Info, 11(2), 137–159.
https://doi.org/10.31580/jmi.v11i2.3039
Omorogiuwa, O., Oboh, E., (2018): *Evaluation of earthing system of distribution substation in
Ekpoma Nigeria*. Journal of Electrical and Telecommunication Engineering, a peer
review of Advances in Electrical and Telecommunication Engineering 1 pp. 31-37.
10.Gomes, C. and Abkadir, M.Z.A., (2014): *Industrial Wastes and Natural Substances for
Improving Electrical Earthing Systems*. International Journal of Electrical Engineering,
21(2) 39-47.
Amadi, H.N., (2015): *Effective earthing system in the corrosive soil of Niger
Delta*International Journal of Emerging Science and Engineering (IJESE), 3(6), 5-9.
Fluke Corporation. (2016). Ground resistance testing guide. Fluke Corporation.
EEE. (2012). IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth
Surface Potentials of a Ground System (IEEE Std 81-2012).
Megger. (2010). A Guide to Earth Resistance Testing.
AEMC Instruments. (2013). Understanding and Measuring Ground Resistance.
ASTM International. (2006). Standard Test Method for Field Measurement of Soil Resistivity
Using the Wenner Four-Electrode Method (ASTM G57-06).


DOWNLOAD PDF

Back


Google Scholar logo
Crossref logo
ResearchGate logo
Open Access logo
Google logo