IIARD International Institute of Academic Research and Development

International Journal of Engineering and Modern Technology (IJEMT )

E-ISSN 2504-8848
P-ISSN 2695-2149
VOL. 11 NO. 1 2025
DOI: 10.56201/ijemt.vol.11.no1.2025.pg42.65

---

Self-Priming Centrifugal Chemical Pumps: A Review

Aggo T. B. Z, Saturday E. G and Ebieto C. E

---

Abstract

This paper gives a thorough examination of the literature of self-priming centrifugal chemical pumps, focusing on their design, operational principles, and applications in various industries. They render surpassing advantages, including improved efficiency in handling liquids containing air or gas, and reduced maintenance requirements. The paper analyzes the fundamental mechanisms that enable self-priming capabilities, including positive displacement elements and impeller design. An analysis of different self-priming centrigugal pump innovations is presented, emphasizing developments in materials and engineering that improve performance and reliability. Examines and also illustrate the practical applications of these pumps in food and beverage processing, chemical processing, wastewater management, and other sectors. Furthermore, the review reveals current challenges and future directions for research, such as development of more energy-efficient designs and innovations in smart pump technologies. This paper serves as a helpful resource for researchers, practitioners and engineers seeking to optimize the use of self- priming centrifugal pumps in the industry for aquous chemicals and other hazardous liquid applications.

keywords:

Self-priming; Centrifugal pumps; Chemical Pumps; Self-priming mechanisms

---

References:

[1] Multiphase-corp.com (2022). Types of pumps and their working principles. Retrieved
December 12, 2024. https://multiphase-corp.com/articles/types-of-pumps-and-their-
working-principles/
[2] Kanute, J. (2004). Self?priming centrifugal pumps: a primer. World Pumps, 456(2004), 30–32.
doi:10.1016/s0262-1762(04)00334-7, 10.1016/S0262-1762(04)00334-7
[3] Michael-Smith-Engineers-Ltd. (2022). Useful information on centrifugal pumps.
Retrieved December 12, 2022.
https://www.michael-smith-engineers. co.uk /resources/useful-info/centrifugal-pumps
[4] Sales@allpumps.com.au (2022) Operating principles of centrifugal pumps. Retrieved
December 17, 2022. https://allpumps.com.au/pumps-by-type/self-priming-pumps/
[5] Rotechpumps.com (2023). A comprehensive guide to self-priming pumps: working, types,
and uses. Retrieved October 9, 2024. https://www.rotechpumps.com/what-is-self-priming-
pump/
[6] DXP Pacific (2020). Pros and cons of self-priming centrifugal pumps. Retrieved
https://dxppacific.com/the-pros-and-cons-of-self-priming-centrifugal-pumps/
[7] Yao, H. Y., Zhang, Y. D., Wu, D. Z., & Wu, P. (2018). Numerical study on hydraulic and self-
priming performance of a double-stage self-priming pump. IOP Conference Series: Earth
and Environmental Science, 163(2018), 012039. doi:10.1088/1755-1315/163/1/012039
[8] Whatispiping.com (2023). What is a self-priming pump? Retrieved September 10, 2023.
What is Pump Priming and Why it is Required? | Self-Priming Pumps – What Is Piping
[9] Qian, H., Wu, D., Xiang, C., Jiang, J., Zhu, Z., Zhou, P., & Mou, J. (2022). A visualized
experimental study on the influence of reflux hole on the double blades self-priming
pump performance. Energies. 15(13), 4617. https://doi.org/10.3390/en15134617
[10] Wang, K., Zhang, Z., Jiang, L., Liu, H., & Li, Y. (2017). Effects of impeller trim on
performance of two-stage self-priming centrifugal pump. Advances in Mechanical
Engineering. 9(2), 1-11. https://doi.org/10.1177/1687814017692493
[11] Qian, H., Mou, J., Ren, Y., Zhu, Z., Liu, N., Zheng, S., & Wu, D. (2019). Investigation of



self- priming process of a centrifugal pump with double blades. Journal of Thermal Science.
30(3), 849-858. doi.org/10.1007/s11630-020-1370-7
[12] Linn, S. (2022). Operating principle of centrifugal pump and its applications. Journal of
Applied Mechanical Engineering. 11(6), 1000424
https://doi.org/10.35248/2168 9873.22.11.424.
[13] Towoju, O. A., Oluwatoyin, O., Benedict, A., Omonigho, I., & Collins, J. (2022). Design of
a single stage centrifugal pump. International Research Journal of Modernization in
Engineering Technology and Science. 10(1), 500-511. https://doi.org/www.irjmets.com
[14] Sathish, K., Abilash, S., Balaji, S., Daniel, S. A., & Dhatchinamoorthi, V. (2021). A review
on performance analysis of centrifugal pump impeller. International Journal of Research
in Engineering, Science and Management. 4(6), 44-48. https://doi.org//www.ijresm.com
[15] Pump101.com (2024). Understanding pumps, motors, and their Controls. Retrieved October
11, 2024. http://www.pumped101.com
[16] Adeniyi, A. A., & Komolafe, O. D. (2014). Performance Analysis of an Experimental
Centrifugal Pump. Nigerian Journal of Technology (NIJOTECH). 33(2) 149-155
https://doi.org/10.4314/njt.v33i2.2
[17] Ding, H., Visser, F. C., Jiang, Y., & Furmanczyk, M. (2011). Demonstration and validation of
a 3d cfd simulation tool predicting pump performance and cavitation for industrial
applications. Journal of Fluids Engineering, 133(1), 011101. doi:10.1115/1.4003196
[18] Si, Q., Bois, G., Liao, M., Zhang, H., Cui, Q., & Yuan, S. (2019). A comparative study on
centrifugal pump designs and two-phase flow characteristic under inlet gas
entrainment conditions. Energies, 13(1), 65. doi:10.3390/en13010065
[19] Zhang, M.-J., Pomfret, M. J., & Wong, C. M. (1996). Three-dimensional viscous flow
simulation in a backswept centrifugal impeller at the design point. Computers & Fluids,
25(5), 497–507. doi:10.1016/0045-7930(96)00008-
[20] Arndt, N., Acosta, A. J., Brennen, C. E., & Caughey, T. K. (1990). Experimental investigation
of rotor-stator interaction in a centrifugal pump with several vaned diffusers. Journal of
Turbomachinery, 112(1), 98. doi:10.1115/1.2927428
[21] Neumann, M., Schäfer, T., Bieberle, A., & Hampel, U. (2016). An experimental study on the
gas entrainment in horizontally and vertically installed centrifugal pumps. Journal of
Fluids Engineering, 138(9), 091301. doi:10.1115/1.4033029
[22] Hong, S. S., & Kang, S. H. (2004). Flow at the centrifugal pump impeller exit with
circumferential distortion of the outlet static pressure. Journal of Fluids Engineering,
126(1), 81. doi:10.1115/1.1637630



[23] Gonza?lez, J., Ferna?ndez, J., Blanco, E., & Santolaria, C. (2002). Numerical simulation of the
dynamic effects due to impeller-volute interaction in a centrifugal pump. Journal of
Fluids Engineering, 124(2), 348. doi:10.1115/1.1457452
[24] Snyder, H. (2019). Literature review as a research methodology: an overview and guidelines.
Journal of Business Research, 104, 333–339. doi:10.1016/j.jbusres.2019.07.039
10.1016/j.jbusres.2019.07.039
[25] Theconstructor.org (2024). Centrifugal pump components, working, types and application.
Retrieved October 9, 2024. https://theconstructor.org/practical-guide/centrifugal-pump-
working-types/2917/
[26] Li, H., Shen, Z., Liu, J., & Wang, C. (2010). Influence of pressure fluctuation on reflux valve
in a self-priming pump with outer recirculation. ASME 2010 3rd Joint US-European
Fluids Engineering Summer Meeting: Volume 1, Symposia – Parts A, B, and C.
doi:10.1115/fedsm-icnmm2010-30216
[27] Abhari, F., Jaafar, H., & Yunus, N. A. M. (2012). A comprehensive study of micropumps
Technologies. International Journal of Electrochemical Science. 7(2012), 9765-9780
https://doi.org/http://www.electrochemsci.org/
[28] Abo Elyamin, G. R. H., Bassily, M. A., Khalil, K. Y., & Gomaa, M. S. (2019). Effect of
Impeller blades number on the performance of a centrifugal pump. Alexandria Engineering
Journal. 58(2019), 39-48 doi: 10.1016/j.aej.2019.02.004
[29] Akhras, A.-R., El Hajem, M., Morel, R., & Champagne, J.Y. (2001). Internal flow
investigation of a centrifugal pump at the design point. Journal of Visualization, 4(1), 91–
98. doi:10.1007/bf03182459
[30] Arun Shankar, V. K., Umashankar, S., Paramasivam, S., & Hanigovszki, N. (2016). A
comprehensive review on energy efficiency enhancement initiatives in centrifugal
pumping system. Applied Energy, 181(2016), 495–513. doi:10.1016/j.apenergy.2016.08.
[31] Bai, L., Zhou, L., Han, C., Zhu, Y., & Shi, W. (2019). Numerical study of pressure fluctuation
and unsteady flow in a centrifugal pump. Processes, 7(6), 354. doi:10.3390/pr7060354
[32] Athavale, M. M., Li, H. Y., Jiang, Y., & Singhal, A. K. (2002). Application of the full
Cavitation model to pumps and inducers. International Journal of Rotating Machinery.
8(1), 45-56. https://doi.org/: mma@cfdrc.com



[33] Barrio, R., Ferna?ndez, J., Blanco, E., & Parrondo, J. (2011). Estimation of radial load in
centri

DOWNLOAD PDF

---

Back